Products

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.

EPOTUF 38-698 is an acrylic modified 1K epoxy ester dispersion supplied in water and n-propoxy propanol solvent. EPOTUF 38-698 is designed for use as a non-pigmented concrete bonding primer to increase adhesion between the concrete and topcoat.

BECKOSOL® 663-X-50 is a short rosin and phenolic modified oxidizing alkyd solution available in xylene. It meets Government Specifications TT-E-515a (Enamel, Alkyd, Lusterless, Quick-Drying) and TT-P-664c (Primer Coating, Synthetic, Rust-Inhibiting, Lacquer-Resisting).

AMBERLAC® 13-031 is a styrene-modified alkyd resin for use in air or force-dry enamels.

AROLON® 847-W-42 is a styrenated acrylic emulsion designed to provide early water-spot resistance and very good corrosion resistance coupled with inhibitive pigment stability. It offers early water-spot resistance, high gloss and good chemical resistance.

EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines. EPOTUF® 37-625 reacts at room temperature with solid or liquid epoxy resins.

BECKOSOL® 3859-Z-80 is a short oil, rosin/phenolic modified alkyd at 80% solids to meet low-VOC emission regulations. BECKOSOL® 3859-Z-80 is designed for lift-resistant primers.

UROTUF® L51 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N methylpyrrolidone, and amines. UROTUF® L51 is suitable for both air-dry and force-dry applications.

UROTUF F600-W-40 is a self-crosslinking water-borne uralkyd designed for garage floor coatings. When properly formulated, coatings made with UROTUF F600-W-40 rival the performance of higher VOC systems in terms of dry time, hardness, chemical resistance, adhesion to concrete and hot tire pick-up resistance.

AROFLINT® 404-XX-60 is a high acid value polyester supplied at 60% solids in an exempt solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin supplied at 80% non-volatile in xylene.

BECKOSOL® 2477-X-65 is a semidrying plasticizing alkyd resin developed for use in nitrocellulose and vinyl lacquers and in urea and melamine modified enamels. It offers good adhesion and great flexibility and toughness

UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of water and N-methyl pyrrolidone. UROTUF® L51-35 is a higher solids version of UROTUF® L51, which allows for greater formulating latitude.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

BECKOSOL® 10-539 is a high-solids, long-oil alkyd developed for use in VOC-compliant architectural enamels, maintenance coatings, and metal primers.

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

UROTUF® L512 is a fully reacted, aliphatic, thermoplastic, urethane resin dispersed in a blend of water, n methylpyrrolidone, and amines and is suitable for both air dry and force dry applications. It is similar to UROTUF® L51 in many properties, but gives better chemical and stain resistance when used alone or when blended with acrylic emulsions.

EPOTUF® 91-263 is a non-HAPs, water-reducible epoxy ester which, when neutralized with the proper amines, can be formulated into VOC-compliant coatings.

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic, urethane polymer provided at 40% solids in N-methylpyrrolidone and water. This product is similar to UROTUF® L52-MPW-30 except for being hight in solids (40% versus 30%) and containing significantly less NMP solvent (5% versus 12%).

BECKOSOL® IA-441 is a short-oil soya alkyd reduced in to 55+/-1%NV in toluene.