Products

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

AROPLAZ® 15-173 is a saturated polyester alkyl modified recommended to formulate polyurethane and melamine crosslinkable industrial finishes.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

FINE-CLAD® M-8731 is a carboxyl functional polyester designed to cure with bisphenol-A type epoxy resins at a 60/40 polyester to epoxy ratio for hybrid systems.

BECKOSOL® 15-215 is a short soya oil alkyd resin designed mainly for 2 component architectural clears and NC lacquers, industrial coatings and car refinish.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

AMBERLAC 4250-50-HV is a modified alkyd resin with styrene monomer

BECKOSOL® IA-441 is a short-oil soya alkyd reduced in to 55+/-1%NV in toluene.

AMBERLAC® 21-013 is an acrylic modified alkyd resin, deigned for roller collapsible tube and metalgraphic enamels.

BECKOSOL® 15-093 is a short DCO/Soya oil alkyd resin designed mainly for pigment dispersion, 2 component clears, NC Lacquers, industrial enamels and varnishes.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent

BECKOSOL® 1700-M-60 is a premium quality, air dry, long oil, siliconized copolymer alkyd which meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels.

BECKOSOL® MS50 is a versatile medium soya oil alkyd resin designed mainly for architectural and industrial enamels and varnishes.

BECKOSOL® 15-254 is a versatile long oil alkyd resin designed mainly for architectural and industrial primer and enamels.

AROFLINT® 303-X-90 is an oxirane-modified ester supplied at 90% solids in xylene. It is used in combination with high acid value polyesters such as AROFLINT® 252-Z1-60, 404-XX-60, D808-XD-71, 809, or 810 at various ratios to yield high performance coatings where excellent appearance and toughness are required.

BECKOSOL® 15-120 is multi-purpose short soya oil alkyd resin designed mainly for industrial coatings, such as enamels, primers, NC lacquers and car refinish.

BECKOSOL®Alkyd We are not able to market the Beckosol brand name in the Asia Pacific region . We offer our Alkyd line in this region thru the REICHHOLD® brand name . Please refer to our All Products Listing for alkyds in other regions and consult with your local representative for the product to meet your need.

KELSOL® 3964-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

RESAFEN® 12-229 is a novolac phenolic resin designed mainly for epoxy phenolic liquid or powder coatings.

BECKOSOL® CS60 is a versatile short soya oil alkyd resin designed mainly for industrial coatings and car refinish.

BECKOSOL® 12-054 is a high-viscosity, short oil TOFA alkyd.

BECKOSOL® 15-131 is a medium soya oil alkyd resin designed mainly for industrial, car refinish and architectural coatings.

AROLON® 559-G4-70 is a non-oxidizing, water-dispersible, acrylic resin for formulating thermosetting coatings crosslinked with aminoplast resins. The uncrosslinked polymer is a hard film former. AROLON® 559 is cut in 2 butoxy ethanol and gives improved viscosity reduction. The resin should be neutralized with a volatile amine before dilution with water.

Beckosol® 11081-E2 is a medium soya alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents. This is the same polymer as Beckosol® 11081 (VM&P) and Beckosol® 11-035. This product meets the polymer composition of Federal Specification TT-R-266D, Type IV.

BECKOSOL® 91790-00 is a medium-oil, chain-stopped, soya alkyd in a blend of low aromatic mineral spirits and xylene.

AMBERLAC® 15-255 is a urethane modified alkyd resin designed to formulate solvent borne 1k PU systems for wood, floor and marine varnishes

AROLON® 6436 is an acrylic polyol resin designed for high solids, high performance polyurethane coatings. Low VOC (420 grams per liter) polyurethane coatings can be easily formulated with standard aliphatic isocyanates. AROLON® 6436 has a high equivalent weight for economy in use.

BECKOSOL® 15-250 is a versatile chain-stopped alkyd designed mainly for industrial coatings and car refinish.