Products

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

AROLON® 850-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on a variety of engineering grade plastics and metals. It is supplied at a slightly basic pH and contains no organic solvent. AROLON® 850-W-45 is recommended for air dry, force dry, and baking primers and/or topcoats for plastics and metals.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

UROTUF® L53-MPW-30 is a fully reacted, color-retentive, thermoplastic, urethane dispersed in a blend of water and N-methyl pryrrolidone.

UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of water and N-methyl pyrrolidone. UROTUF® L51-35 is a higher solids version of UROTUF® L51, which allows for greater formulating latitude.

UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic, urethane polymer provided at 40% solids in N-methylpyrrolidone and water. This product is similar to UROTUF® L52-MPW-30 except for being hight in solids (40% versus 30%) and containing significantly less NMP solvent (5% versus 12%).

UROTUF® L512 is a fully reacted, aliphatic, thermoplastic, urethane resin dispersed in a blend of water, n methylpyrrolidone, and amines and is suitable for both air dry and force dry applications. It is similar to UROTUF® L51 in many properties, but gives better chemical and stain resistance when used alone or when blended with acrylic emulsions.

UROTUF L522-G8W-40 is an anionic stabilized aliphatic urethane polymer provided in a blend of dipropylene glycol dimethyl ether and water.

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

Amberlac® 13802-E2 is a dehydrated castor oil based acrylic modified alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents. This is the same polymer as Amberlac® 13-802 (Xylene).

UROTUF L63-W-38 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in water. This is the solvent free version of UROTUF L63-MPW-38.

UROTUF E300-W-40 is a UV curable coating resin based on an anionic stabilized dispersion of an aliphatic urethane polymer provided at 40% solids in water.

UROTUF L56-W-38 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in water. The polymer in this resin is compositionally equivalent to that of UROTUF L56-MPW-36.

UROTUF® L522-W-40 is an anionic stabilized aliphatic urethane polymer provided at 40% solids in water. The polymer in this resin is compositionally equivalent to that in UROTUF® L522-MPW-40.

UROTUF® L55 is a fully reacted, aliphatic, polyurethane dispersed in a blend of water, N methylpyrrolidone, and amines. Important properties include low-temperature flex and impact properties, excellent adhesion to a variety of substrates, and good wet rub resistance.

UROTUF® L51 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N methylpyrrolidone, and amines. UROTUF® L51 is suitable for both air-dry and force-dry applications.

UROTUF® L63-MPW-3 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in a blend of N-methyl pyrrolidinone and water.