Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

UROTUF® F83-M-75 is a high solids oil modified urethane developed for use in 350 G/L floor varnishes.

EPOTUF® 38-692 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhibits good compatibility with inhibitive pigments. Temperatures during the grind phase should not exceed 140 F.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

UROTUF® F48-M-50 is a one-package, ASTM Type I oil modified urethane, based on soybean oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

SYNTHEMUL® 90-416 is a high performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. SYNTHEMUL® 90-416 can be formulated at less than 20 gram/liter VOC, giving the paint formulator more latitude in meeting current and future environmental regulations.

EPOTUF 37-685 is a patented amine functional dispersion that is used to formulate two component water-borne epoxy coatings with properties comparable to conventional solvent based two component epoxy coatings.

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent

This elastomeric acrylic emulsion was developed for use in wall coatings and other applications that require water resistance and flexibility. These coatings help protect and extend the useful life of stucco and masonry surfaces by providing an effective moisture barrier.

BECKOSOL AQ 210 Red Iron Oxide Primer Benchmarking Study

AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin supplied at 80% non-volatile in xylene.

FINE-CLAD® M-8930 is a carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for standard weathering with excellent physical properties.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

AROPLAZ® 5293-B-75 is a water-dispersible polyester resin designed for conventional bake coatings. Selection of amino crosslinker and neutralization agent provides maximum film properties.

UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic, urethane polymer provided at 40% solids in N-methylpyrrolidone and water. This product is similar to UROTUF® L52-MPW-30 except for being hight in solids (40% versus 30%) and containing significantly less NMP solvent (5% versus 12%).