Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® 12102-E2 is a short TOFA chain-stopped alkyd supplied in a blend of tertiary butyl acetate, n-butyl acetate and Aromatic 100 solvents.

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.

AMBERLAC® 15-255 is a urethane modified alkyd resin designed to formulate solvent borne 1k PU systems for wood, floor and marine varnishes

AROFLINT® 252-Z1-60 is a high acid value polyester supplied at 60% solids. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

EPOTUF® 38-505 is a solvent cut of EPOTUF® 37-001 at 75% solids in xylene

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

AROFLINT® 810 is an acid functional polyester resin supplied at 70% solids in a HAPS compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

FINE-CLAD® A-241 is a resin with both hydroxyl and glycidyl groups. It is designed to reduce pinholes and improve stain resistance in powder coatings.

EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin designed to formulate with lower co-solvent demand than standard water reducible epoxy ester resins. EPOTUF® 38-694 is an extremely stable water soluble resin giving up to 20 plus weeks in a white enamel at 120 F. This resin can be used in high gloss enamels or primers

UROTUF® F96-MPW-32 is a waterborne oil modified urethane dispersion. UROTUF® F96 was designed for single package crosslinked coatings. Crosslinking is achieved by air oxidation at ambient temperatures in the presence of metallic driers. UROTUF® F96 performance meets, and in many cases, exceeds that of conventional solvent borne oil modified urethanes. An added benefit is formulated VOCs below 200 grams per liter.

BECKOSOL® 10-015 is a phenolic-modified alkyd designed for use as the sole vehicle or as a modifier for medium oil alkyds.

EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines. EPOTUF® 37-625 reacts at room temperature with solid or liquid epoxy resins.

KELSOL® 3969-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. *This product is also available in a HAPs-free solvent.

FINE-CLAD® M-8911 is a superdurable carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for excellent weathering resistance

EPOTUF 37-685 is a patented amine functional dispersion that is used to formulate two component water-borne epoxy coatings with properties comparable to conventional solvent based two component epoxy coatings.

AROFLINT® 404-XX-60 is a high acid value polyester supplied at 60% solids in an exempt solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® 15-120 is multi-purpose short soya oil alkyd resin designed mainly for industrial coatings, such as enamels, primers, NC lacquers and car refinish.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

FINE-CLAD® M-8025 is a hydroxyl-functional polyester. It is designed to cure by urethane cross-linkers where it imparts high hardness, good weather resistance, and excellent stain resistance.