Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

BECKOSOL® 15-110 is a 100% N.V. medium soya oil alkyd resin designed mainly for industrial, graphic arts and traffic paints.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.