Products

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Rhino Linings USA, Inc. 1379 Resin is a Laminating and Tooling Epoxy Resin. Specialty epoxy system used for making large scale parts such as wind turbine rotors. Long working life with quick cure. High Tg without post cure.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

Rhino Linings USA, Inc. 1314 Resin is a Marine Laminating, Low Viscosity Epoxy Resin/ Offsets:West 105. Used for marine applications such as laminates, adhesives, sealers and fairing compounds. Also used where a low viscosity, quick curing epoxy system is desired. Very low mixed viscosities quickly wet thick reinforcements. Exhibits very low exudation, allowing secondary bonding with minimal preparation.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

Rhino Linings USA, Inc. 1319 Resin is a Press Molding Resin Modified for Improved Flexibility and Adhesion. Press molding epoxy system, modified for added flexibility and adhesion. All listed hardeners cure very quickly at standard process temperatures (160°F – 210°F).