LNP ELCRIN - 61000IiQ - SABIC's Specialty - PC/PBT Alloy

Identification & Functionality

Additives Included: Impact Modifier
Polymer Name: PC/PBT Alloy
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Recycled Polymers
Plastics — Engineering & Specialty Polymers
Blends & Alloys

Features & Benefits

Labeling Claims: Contains PCR Resin,
No Added PFAS,
Recyclable,
Recycled,
Sustainable
Materials Features: Chemical Resistant,
Good Colorability,
High Impact Resistance,
Impact Modified,
Low Temperature Impact Resistance,
Pigmentable,
Recyclable,
Unreinforced
Value Proposition Compared To Fossil Based PBT Compounds: Reduced carbon, energy footprint

Improved social impact

Similar mechanical properties & color space

Drop-in solution for existing tools

REACH, RoHS and EPEAT compliant

SABIC LNP Health care policy compliance. May comply with regional food contact regulations .

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Automotive Applications,
Automotive Interior Parts,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical/Electronic Applications,
Home Appliances,
Medical/Healthcare Applications,
Personal Accessories,
Sporting Goods,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 HB
Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	45	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	46	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	4	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	140	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2050	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	74	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2000	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	49	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	47	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	150	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	1950	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	70	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	1920	MPa	ISO 178

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.19	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.8 - 1.2	%	SABIC method
Melt Flow Rate (at 250°C, 5 kgf) ¹¹	13	g/10 min	ASTM D1238
Density ¹¹	1.2	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.3	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.08	%	ISO 62
Melt Volume Rate (at 250°C, 5 kg) ¹¹	12	cm³/10 min	ISO 1133

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	75	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	99	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 150°C, flow) ¹¹	0.00009	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 150°C, xflow) ¹¹	0.000095	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -30°C to 80°C, flow) ¹¹	0.00009	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -30°C to 80°C, xflow) ¹¹	0.000095	1/°C	ISO 11359-2
Relative Temperature Index (Electrical) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	75	°C	UL 746B

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	650	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	600	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	50	J	ASTM D3763
Izod Impact (Notched, 80104, at 23°C) ¹¹	55	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at -30°C) ¹¹	47	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80104 sp=62mm) ¹¹	55	kJ/m²	ISO 179/1eA

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 1.5	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ ELCRIN™ 61000IiQ