Products

Material Glass Formulated PTFE Features/Benefits Excellent heat, wear, and chemical resistance. Good cryogenic properties. Caution: can be abrasive running against soft metals at high surface speed. Excellent material for back-up rings. Working Temperature Range -450° to +600°F [-268° to +316°c] Color Yellow

Exac ECTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Features/Benefits: Color: White FDA compliant Low gas permeability Good cryogenic properties Limited wear and heat resistance Working Temperature Range: -268° to +260°C [-450° to +500°F]

Chemfluor UHMW Polyethylene Flim is an Ultra High Molecular Weight Polyethylene product. It is available in North America. Applications of Chemfluor UHMW Polyethylene Flim include bags/liners, engineering/industrial parts and food contact applications.Characteristics include: Chemical Resistant High ESCR (Stress Crack Resistant) Impact Resistant Wear Resistant

Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating.Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

Features and Benefits Excellent wear and heat resistance Non-abrasive Recommended for moderate to high speed service running against soft or hard metals Performs well against lubricated and non-lubricated surfaces

Rulon® AR is somewhat more flexible than Rulon® LR, hence suitable for seals and bonded coating of slide surfaces. It has many decades of use in automotive shaft seals and fuel metering pump cups.Rulon AR has a practically universal chemical inertness like that of Rulon LR and provides long life and reliability in continuous non-lubricated service. It is capable of operating at PV values up to approximately 10,000. Higher PV values are possible for intermittent use applications.

Korton E-CTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Korton E-CTFE include aerospace, electrical/electronic applications, film and wire & cable.Characteristics include: Flame Rated Wear Resistant Chemical Resistant Flame Retardant Good Stiffness

Korton FEP is a Polyvinylidene Fluoride (PVDF) product. It can be processed by laminating or thermoforming and is available in North America. Applications of Korton FEP include electrical/electronic applications, aerospace, bags/liners, coating applications and containers.Characteristics include: Flame Rated Chemical Resistant Good Flexibility UV Resistant Weather Resistant

Rulon® 945 is a black PTFE-based material that has very low wear and deformation under load, making it ideally suited for demanding thermal applications. In fact, its deformation is the lowest of all Rulon® grades. It also possesses excellent chemical resistance and good dimensional stability.Rulon 945 is best suited for use against hard mating surfaces, like hardened steel substrates since it does have moderate abrasive qualities. It is not suitable in applications where electrically insulating properties are required.

Tygon R-3400 is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon R-3400 include engineering/industrial parts and hose/tubing.Characteristics include: Chemical Resistant Good Flexibility Low to No Odor/Taste UV Resistant Wear Resistant

Dynafoam 60% Reduction is a Thermoset, Unspecified (TS, Unspecified) product. It can be processed by foam processing and is available in North America. Applications of Dynafoam 60% Reduction include foam and sealing applications.Characteristics include: Heat Resistant Chemical Resistant Good Dimensional Stability

Rulon® 1337 is a tan material made entirely from FDA compliant components. It has excellent physical properties and is chemically compatible with most chemicals, except concentrated sulfuric acid. This offers much flexibility in wash-down environments of food and pharmaceutical processing environments. It has a slightly lower coefficient of friction than Rulon J, offering extended life and less abrasion with softer mating surfaces. It is compatible with most commercially available natural lubricants for additional reduction in friction.

Features/Benefits: Color: Dark Gray Soft material Good for sealing at low pressures Can be abrasive running against soft metals Good heat resistance Working Temperature Range: -268° to +316°C [-450° to +600°F]

Tygon R-1000 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Corrosion Resistant Low to No Odor/Taste

Korton PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Korton PVDF include automotive, electrical/electronic applications, aerospace, bags/liners and coating applications.Characteristics include: Flame Rated Chemical Resistant Corrosion Resistant Fatigue Resistant Heat Resistant

Exac PTFE (EXTRUDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (EXTRUDED) include aerospace, engineering/industrial parts, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Rulon® W2 is a black PTFE-based material developed for use in fresh-water applications. It exhibits low friction and excellent wear characteristics (one of the lowest wear rates in fresh water) as well as good thermal dissipation, preventing shaft distress. Its properties are enhanced when wet.It is compatible with most metal substrates and soft mating surfaces. Rulon W2 is a good alternative to Rulon J when superior chemical resistance is needed. However, it should not be used on very soft mating surfaces or where electrical insulation is desired.

Tygon R-3603 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Corrosion Resistant Good Flexibility

Kemid Polyetherimide Film is a Polyether Imide (PEI) product. It is available in North America. Typical application: Electrical/Electronic Applications.Characteristics include: Chemical Resistant Flame Retardant High Strength

Tygon B-44-4X is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Features/Benefits: Color: Dark Gray Particularly suitable for water and steam service Excellent general purpose material for heat and wear resistance Recommended for dry and poorly lubricated applications Working Temperature Range: -268° to +260°C [-450° to +500°F]

Features/Benefits: Color: Gold Extremely tough, long wearing material Limited heat and chemical resistance Excellent in water and water-based fluids, particularly suitable for abrasive media Recommended for long wear life under severe conditions Working Temperature Range: -268° to +82°C [-450° to +180°F]

Korton PFA is a Perfluoroalkoxy (PFA) product. It can be processed by laminating or thermoforming and is available in North America. Applications of Korton PFA include film and wire & cable.Characteristics include: Flame Rated Chemical Resistant Good Flexibility Good Toughness High ESCR (Stress Crack Resistant)

Exac PFA is a Perfluoroalkoxy (PFA) product. It is available in North America. Applications of Exac PFA include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Tygon F-4040-A is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon F-4040-A include engineering/industrial parts and hose/tubing.Characteristics include: Good Flexibility Low to No Odor/Taste

Tygon B-44-4X-I.B. is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X-I.B. include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Rulon® 1045 is a dull gold material that has an excellent ability to elongate in a flip seal application. Coupled with excellent frictional characteristics, it offers the added benefit of energy savings, as well as increased sealing efficiency.This material is also resistant to many harsh chemicals found in the application environments where it is typically used. It is also compatible with most commercially available lubricants for additional reduction in friction. Its low deformation properties allow it to be effective as a bearing or sliding surface.

Rulon® 641 is manufactured from FDA compliant materials which possess excellent load and wear characteristics.It offers excellent, continuous non-lubricated service up to 10,000 PV - higher for intermittent service. While the load capacity of Rulon 641 is generally limited to 1,000 psi at room temperature, deformation is a function of wall thickness, temperature and load.Its compatibility with a wide array of mating surfaces, including mild steel, 303 and 316 stainless steels, as well as harder materials, make it a good choice for most food and pharmaceutical bearing applications.

Exac PTFE (MOLDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (MOLDED) include engineering/industrial parts, aerospace, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Tygon B-44-3 is a Polyvinyl Chloride product. It can be processed by injection molding and is available in North America. Applications of Tygon B-44-3 include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Good Flexibility Non-Toxic

Tygon S-54-HL is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon S-54-HL include medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Non-Toxic

Exac CTFE is a Polychlorotrifluoroethylene (PCTFE) product. It is available in North America. Applications of Exac CTFE include engineering/industrial parts, aerospace, electrical/electronic applications, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Chemfluor PTFE is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Typical application: Food Contact Applications.Characteristics include: Flame Rated Low to No Odor/Taste Chemical Resistant Good Flexibility High Purity

Rulon® 957 is a speckled green material that was developed specifically for noise dampening and abrasion resistance, such as in commercial or residential clothes dryers.It provides low friction operation on softer mating surfaces at higher loads than Rulon® J.This material also offers excellent performance on coated metals, particularly porcelain. Among its many benefits are an overall reduction of the weight of the finished product, vibration absorption, and cost reduction due to rapid manufacturing methods.

Chemfluor FEP is a Perfluoroethylene Propylene Copolymer (FEP) product. It is available in North America. Typical application: Food Contact Applications.Characteristics include: Flame Rated Low to No Odor/Taste Chemical Resistant Good Flexibility High Purity