Products

SCIGRIP® SG7706 B is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

SCIGRIP® SG300-05 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . Most metals can be bonded without primer2 . These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation1, 2, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG5000-06 Methacrylate Adhesives are high strength two-component products for bonding metals2 , plastics1 and composites. They offer a unique combination of convenient 1:1 mix ratio and ability to adhere to a wide variety of materials. Most metals, including steel and aluminum, can be bonded without surface pretreatment. A choice of 3, 6 and 15 minute working times, fast cure and rapid strength build make this series of adhesives an ideal first choice for diverse bonding applications. Packaging options include 50 and 400 ml cartridges and in 19 and 189 liters (5 and 50 gallon) bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG800-15 are two component, 10:1 ratio Methacrylate Adhesives for bonding metals and other plastic substrates. The SG800 Series is formulated to meet specific requirements of the transportation industry, including high temperature strength, excellent fatigue and impact resistance and low bond-line read through on show surfaces. Ability to adjust working times and minimal surface preparation requirements makes the SG800 Series ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for use with meter-mix dispense equipment.

SCIGRIP® SG300-15 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . Most metals can be bonded without primer2 . These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation1, 2, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG5000-13 Methacrylate Adhesives are high strength two-component products for bonding metals2 , plastics1 and composites. They offer a unique combination of convenient 1:1 mix ratio and ability to adhere to a wide variety of materials. Most metals, including steel and aluminum, can be bonded without surface pretreatment. A choice of 3, 6 and 15 minute working times, fast cure and rapid strength build make this series of adhesives an ideal first choice for diverse bonding applications. Packaging options include 50 and 400 ml cartridges and in 19 and 189 liters (5 and 50 gallon) bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG5000-03 Methacrylate Adhesives are high strength two-component products for bonding metals2 , plastics1 and composites. They offer a unique combination of convenient 1:1 mix ratio and ability to adhere to a wide variety of materials. Most metals, including steel and aluminum, can be bonded without surface pretreatment. A choice of 3, 6 and 15 minute working times, fast cure and rapid strength build make this series of adhesives an ideal first choice for diverse bonding applications. Packaging options include 50 and 400 ml cartridges and in 19 and 189 liters (5 and 50 gallon) bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG800-05 are two component, 10:1 ratio Methacrylate Adhesives for bonding metals and other plastic substrates. The SG800 Series is formulated to meet specific requirements of the transportation industry, including high temperature strength, excellent fatigue and impact resistance and low bond-line read through on show surfaces. Ability to adjust working times and minimal surface preparation requirements makes the SG800 Series ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for use with meter-mix dispense equipment.

SCIGRIP® SG7706 is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

SCIGRIP® SG300-40 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . Most metals can be bonded without primer2 . These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation1, 2, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.