Products

AP1549 is Halogen Free masterbatch developed by Silma for PP application, suitable for injection molding and extrusion to obtain Class V2 – UL94 or Class B1 – DIN 4102. Excellent glow wire even at low thickness is suitable for Electrical application.

Silma AP1476 is highly concentrated bromine based and sinergystic masterbatch, on polypropylene (PP) carrier.Suitable for PP fibers, films, injection molding of the chers and items in outside employs. It's, able to comply with V2 - UL94 and italian CLASS 1.

AL1313 is Highly filled masterbatch of antiblocking agent for blow and cast film till 15 micron. Helps the tubular opening, reduces the sticking, improve welding,give stability output of the extruder. The use together with other additives is possible without problems.

Silma AY1483 is highly filled masterbatch of Not halogenated organic based flame retardants, suitable for foamed sheet polistyrene extrusion, also on injection molding process, able to comply with V2 - UL94. Can be used with color and light stabilizers.

Silma AP1372 is highly filled masterbatch of Not halogenated organic based flame retardants, suitable for extrusion PP (pression or discharge civil/industrial pipe) and on injection molding process. Able to comply with V2 - UL94 and B1 - DIN 4102. Can be used with color masterbatches and light stabilizers.

Silma AY1056 is a masterbatch containing antistatic agents dispersed in styrene polymer. It's particularly effective for styrene polymers (cristal and shock-proof types) in injection molding and extrusion processes. Suitable for packaging with direct contact with food and drink. Its action will explicate at over 50% relative air humidity.

Silma AE1066 is expanding masterbatch containing azodicarbonamide and synergists suitable for injection molding of products in sectors such as footwear, furniture, housewares, toys and industry to obtain a lightening of the product or a particular esthetic effect, useful for limiting surface shrinkage.

Silma AE1153 is highly concentrated brominated and sinergystic masterbatch suitable for poliolefine, able to comply class V0 - UL94 with 1,6 mm tickenss. Is suitable for extrusion, injection molded process, but also for higher 20 micron film tickness.

AA1303-M is Masterbatch with a very high concentration of nitrogenous substances (halogen-free) and related synergists, specific for PA6, PA66, for extrusion of tubes, films, fibers and more as well as for injection molding. Suitable for obtaining class V0 - UL94.

AA1393/M is Masterbatch with a very high concentration of nitrogenous substances (halogen-free) and related synergists, specific for PA12, for extrusion of tubes, films, fibers and more as well as for injection molding. Suitable for obtaining class V0 - UL94.

AE1190 is Highly concentrated halogenated and sinergystic masterbatch suitable for LDPE film and-or in extrusion isobutane gas foamed products. Able to comply norm - UL94 - DIN 4102 - ISO 1182 - ASTM 2863 - Improve in percentage also LOI value.

AL1142A is Highly viscosity polydimethilsiloxane process aids for compound of mineral flame retardant filler. Improve surface quality, reduce viscosity, remove of die-built-up, reduce mineral filler stick to the metal of extruder, increase fillers dispersion and output stability.

AP1305 is Masterbatch process aids for mineral filled compounds not containing MAH-grafted coupling agents. Improve surface quality, reduce viscosityand stick to the metal of extruder, remove of die-built-up, increase fillers dispersion and output stability.

Silma AF1037 is a masterbatch containing lubricant and slipping agent particularly suitable for films, extrusion and blow molding. Reduces friction and help the output of the extrudate polimers. The use with other additives is possible, but preliminary test are advised.

Silma BE2027/A is highly concentrated bromine based and sinergystic masterbatch, on polypropylene (PP) carrier, gray color RAL 7037. Suitable for PP pipelines, fittings and connectors, also for injection molded process. Able to comply with V2 - UL94 and B1 - DIN 4102.

Silma AP1731 is Halogen Free masterbatch for Polypropilene 30% talc or calcium carbonate to comply UL94 Class V0. It’s according to Regulation IEC61249-2-21 until 35%, Antimony free, could be used in extrusion or injection molding.

AL1339 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine and to prevent oxidation on the machine stop.

AL1469 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine and to prevent oxidation on the machine stop.

AX1696 is Halogen Free masterbatch developed by Silma for PE film, according to Regulation IEC 61249-2-21, Antimony free, replace at the same dosage the halogenated flame retardant masterbatches based on DBDPE + Sb2O3. It goes well on very thin thickness, it has good light stability and high mechanical performance.

Silma AP1230A is highly filled masterbatch of Not halogenated organic based flame retardants, suitable for PP fibers not less 5 denari (for carpets and textiles), furniture, geotextiles, automotives, films and packaging. It's able to comply with V2 - UL94.

Silma AW1295 is a masterbatch containing endothermic foamed substance and synergics, suitable for injection molding wine cork, insulating profiles, furnishment, houshold, pipes, industrial goods. Suitable for obtain weight diminution or particulary esthetic appearance. Is also able to reduce surface shrinkage. Range temperature about 130°C.

AL1217 is Masterbatch containing process aids for polyolefins, is a compatibilizer, improve the surface smoothness (reduce the aesthetical defects of the items), reduce the wear equipments. Able to reduce the viscosity and the energy comsumption during compounding and processing.

Silma AW1414 is a masterbatch containing endothermic foamed substance and synergics, suitable for injection molding, insulating profiles, pipes, industrial goods. Suitable for weight or surface shrinkage diminution. Capable for obtain particulary esthetic appearance. Don't leave residues in the mold. Temperature range about 140°C.

AE1046A is Used in the film, in the extrusion of compounds and in the processing of regenerated products in general, it favors the elimination of air or gas bubbles due to the presence of humidity or foreign liquids in the material used, improving its appearance and workability.

AL1508 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine.

AW1410 is Masterbatch containing particulary substance and synergic, suitable when to need anticipate start point temperature expansion in polymer process, naturally is possible to reduce this temperature only from 5 'till 15 °C. This masterbatch work whit exothermic and endothermic foaming agents.

Silma BE2182/A is highly filled masterbatch of Not halogenated organic based flame retardants, gray RAL 7037, suitable for PP pipe extrusion, also on injection molding process, able to comply with V2 - UL94 and B1 - DIN 4102. Can be used with color and light stabilizers.

AZ1531-M is Highly filled masterbatch of process aids for compound of mineral flame retardant filler. Improve surface quality, reduce viscosity, remove of die-built-up, reduce mineral filler stick to the metal of extruder, increase fillers dispersion and output stability.

Silma AE1242A is a masterbatch containing endothermic foamed substance and synergics, suitable for injection molding shoes, insulating profiles, furnishment, household, pipes, industrial goods. Suitable for obtain weight diminution or particulary esthetic appearance. Is also able to reduce at the surface shrinkage. Range temperature about 190°C.

Silma AW1352 is a masterbatch containing endothermic foamed substance and synergics, suitable for injection molding wine cork, insulating profiles, furnishment, houshold, pipes, industrial goods. Suitable for obtain weight diminution or particulary esthetic appearance. Is also able to reduce surface shrinkage. Range temperature about 140°C.

Silma AF1093A is highly filled masterbatch of transparent antiblocking agent for film belove of 100 micron and injection molding. Helps the opening blow film, reduces the sticking, improve welding, give stability output of the extruder. Not problem with corona treatment.

AP1130A is Highly concentrated brominated and sinergystic masterbatch suitable for automotive cables in PE, XLPE, PP, TPV and TPE. For unbroken temperature of 125°C, ISO 6722 SAE J 1127 - 1128, UL1685. Able to comply class V0 - UL94 with 1,6 mm tickness.

Silma AE1207A is a masterbatch containing endothermic foamed substance and synergics, suitable for injection molding shoes, insulating profiles, furnishment, household, pipes, industrial goods. Suitable for obtain weight diminution or particulary esthetic appearance. Is also able to reduce at the surface shrinkage. Range temperature about 160°C.