Products

Skyrol® SW84G (92ga) Polyester white opaque polyester film with an adhesion promoting chemical treatment on both sides. It provides enhanced adhesion to coatings, inks and adhesives.SW84G is available in a wide range of thickness from 92ga to 1000ga. SW84G film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f).

Skyrol® SH82 (200ga) Polyester is an optically clear, glossy, two side chemically treated film. It provides an enhanced adhesion to various inks and adhesives. SH82 film is available in a range of thickness from 200ga to 750ga, and is used for high quality printing and solvent coating applications. SH82 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f).

Skyrol® SG00 (60ga) Polyester is an untreated slightly rough-surfaced and hazy polyester film to enhance handling and runnability. SG00 is available in a wide range of thickness from 60ga to 1000ga and is extensively used for drafting, release sheet, lamination, protection, collar stay. dust cap and general purpose applications. SG00 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f).

Skyrol® AH68L Polyester is off-annealed product of SH68L to enhance the heat stability and is optucally clear, glossy, both side adhesion promoting pretreated polyester film. AH68L is available in the thickness from 175 micron.

Skyrol® AH82L Polyester is off-annealed product of SH82L to enhance the heat stability and is optucally very clear, glossy, both side adhesion promoting pretreated polyester film. AH82L is available in the thickness from 23 to 188 micron.

Skyrol® SR50 (92ga) Polyester is an untreated, rough-surface, and high haze polyester film with excellent dielectric strength. SR50 is available in a wide range of thickness from 92ga to 1000ga and is extensively used for cable wrapping, electrical motor insulation and other general purpose applications. SR50 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f,g.h).

Skyrol® SR53 (500ga) Polyester is an untreated, rough-surface, milky white and hazy polyester film. SR53 has excellent mechanical and dielectric strength, durability, dimensional stability, low water absorption, and good resistance to most chemicals. SR53 retains these properties over a wide range of temperature and humidity. SR53 film is UL Flammability Rated at VTM-2.

Skyrol® SH22 (48ga) Polyester is an optically clear film with an adhesion promoting chemical treatment on both sides. It provides an enhanced adhesion to various inks and adhesives. SH22 film is available in a range of thickness 48ga to 142ga, and is used for label, solar control, printing and high grade packaging applications. SH22 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f,g,h).