Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
Features & Benefits
- Biodegradability
The product is expected to be inherently biodegradable.
Applications & Uses
- Markets
- Applications
TOXIMUL 8362 is a specially formulated blend of surfactants. It can be used as a non-gelling, water soluble surfactant in various water soluble pesticides including glyphosate.
Properties
- Formulation Type
- Physical Form
- Appearance
- Amber liquid (at 25°C)
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.05 | g/ml | — |
| Flash Point | min. 94 | °C | SETA Flash Point Tester |
| HLB | 13 | — | — |
| Moisture Content | max. 4 | % | MOISTURE |
| pH (in 1% aqueous) | 8 - 10 | — | — |
| Pour Point | 9 | °C | — |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
| Viscosity (at 25°C) | 170 | cPs | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
- TOXIMUL 8362 is approved for use as an inert ingredient under U.S. CFR 180.920.
- The components of TOXIMUL 8362 are listed in the following countries: United States (TSCA), Canada (DSL), Philippines (PICCS), Australia (AICS), China (IECSC), Japan (ENCS), and Korea (ECL).
Safety & Health
- Health Effects
The product is expected to be slightly toxic orally (LD₅₀ > 1000 mg/kg) and may cause skin and eye irritation.
Packaging & Availability
- Standard Packaging
TOXIMUL 8362 is available in drums (470 lb, 213 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL 8362. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
- Bulk storage information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained for long periods of time without degradation of the product.
- TOXIMUL 8362 which has been stored in drums at temperatures below 50°F (10°C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.