Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- CAS No.
- 9003-11-6
- EC No.
- 618-355-0
- Technologies
Applications & Uses
- Markets
- Applications
- TOXIMUL 8321 is a 100% active nonionic surfactant used as an emulsifier in a variety of agricultural formulations.
- Emulsifiable Concentrates
- Microemulsions
- Suspension Concentrates
- Suspoemulsions
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear to hazy liquid (at 25°C)
- Insoluble in
- Water, Kerosene
- Soluble in
- Methanol, Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Cloud Point (10% in deionized water) | 16 | °C | — |
| Base | PPG/PEG | — | — |
| Density (at 25°C) | 1.03 | g/ml | — |
| HLB | 7 | — | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| Average Molecular Weight | 3650 | — | — |
| Moisture Content | 0.5 | % | — |
| Surface Tension (0.1% Aqueous) | 34.5 | dynes/cm | — |
| pH (in 1% aqueous) | 5 - 7 | — | — |
| Pour Point | 2 | °C | — |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
| Viscosity (at 25°C) | 900 | cPs | — |
| Viscosity (at 45°C) | 300 | cPs | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of TOXIMUL 8321 are listed in the following countries: the registration numbers for the active ingredients are included in parentheses: United States (TSCA 9003-11-6), Australia (AICS 9003-11-6), Canada (DSL 9003-11-6), China (IECSC 9003-11-6), Japan (ENCS 7-327), Korea (ECL Serial No. KE- 24574), Philippines (PICCS 9003-11-6), and New Zealand (ZNIoC 9003-11-6). It is the responsibility of the end user to review the chemical control regulations for each country.
- TOXIMUL 8321 is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.940a, 180.940c and 180.960.
Safety & Health
- Other Data DOT Classification
- Non-Hazardous
Packaging & Availability
- Standard Packaging
TOXIMUL 8321 is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL 8321. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
- Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained for long periods of time without degradation of the product.
- TOXIMUL 8321 which has been stored in drums at temperatures below 75°F (24°C) may thicken and become hazy. It can be cleared and fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.