Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
Applications & Uses
- Markets
- Applications
TOXIMUL 3484 is specially formulated blends of anionic/nonionic surfactants designed for use in an extensive range of pesticides. These blends are not designed to be used in combination. Rather, adjusting aids are available for optimization purposes. Recommended adjusting aids include, but are not limited to, NINATE® 60E, MAKON® TD-12, and TOXIMUL 8320.
Properties
- Formulation Type
- Physical Form
- Appearance
- Hazy, amber liquid
- Dispersible in
- Water
- Soluble in
- Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.02 | g/ml | — |
| Flash Point | 70 | °C | PMCC Flash Point Tester |
| HLB | 9 | — | Calculated |
| Moisture Content | 0.6 | % | — |
| pH (5% in 1:1 IPA/H₂O) | 5.9 | — | — |
| Pour Point | -12 | °C | — |
| Regulated Volatile Organic Chemicals (Aromatic Naphtha) | 22 | % | U.S. EPA |
| Viscosity (at 25°C) | 3000 | cPs | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
- The TOXIMUL 3483 and 3484 series are approved for use as inert ingredients used pre- and post-harvest under U.S. EPA 40 CFR 180.910 and 180.960. The limitation for post-harvest use is 15.6% for TOXIMUL 3483, and 10.4% for TOXIMUL 3484. There is no limitation for pre-harvest use.
- Components of the TOXIMUL 3483 and 3484 series are listed in the following countries’ inventories: United States (TSCA), Canada (DSL), Australia (AICS), Europe (EINECS/Polymer), New Zealand (NZIoC), Philippines (PICCS), Korea (ECL), China (IECSC).
Safety & Health
- Other Data DOT Classification
- Combustible
Packaging & Availability
- Packaging Type
- Standard Packaging
TOXIMUL 3484 is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL 3484 surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials. Use in a well ventilated area away from sparks and open flames.