Products

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toray E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural Applicationss in the motorsport and marine industries. Toray E722 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E722 is compatible for co-cure with Toray MicroPly™ EF72, a 120°C (248°F) cure resin film, and Toray MicroPly™ SC72A syntactic core. 120°C (248°F) Cure Toughened Epoxy Resin System

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

Toray E720 is a 120°C (248°F) cure toughened epoxy prepreg. E720 offers excellent adhesive properties, allowing direct lamination to honeycomb without the use of a film adhesive. E720 is designed for structural Applicationss in motorsport and marine industries. E720 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E720 is compatible for co-cure with Toray’s 120°C (248°F) cure resin film MicroPly™ EF72 and syntactic core Toray MicroPly™ SC72A. If fire retardant properties are required, refer to Toray E721-FR. 120°C (248°F) Cure Toughened Epoxy Resin System

Toray 8020-FR is a modified epoxy resin system suitable for curing between 70°C (158°F) and 120°C (248°F). The medium viscosity resin is pre impregnated into high performance fibers such as carbon, glass and aramid. Toray 8020-FR offers excellent structural properties, flame retardance and toughness. Toray 8020-FR is designed for structural Applicationss in the motor racing, general industrial fabrications and marine industries and is suitable for a wide range of engineering Applicationss.

Toray Advanced Composites’ aluminum commercial (AAC) grade honeycomb core is manufactured from corrosionresistant 3003 alloy foil. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, aluminum honeycomb is particularly suitable as a shear carrying core in adhesively bonded sandwich panel assemblies.

Toray RS-1 is an epoxy prepreg resin that provides an excellent balance of mechanical properties, toughness, and modulus. RS-1 has been evaluated and qualified in areas ranging from marine to aerospace and dielectric structures. RS-1 is also available in a lower temperature curing formulation 80°C (176°F).

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Toray E726 is a toughened epoxy resin system with controlled flow for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for use within medical and industrial Applicationss and would also suit a wide range of engineering Applicationss. Toray E726 is compatible for co-cure with Toray EF72, a 120°C (248°F) cure resin film and Toray MicroPly™ SC72A syntactic core.

Toray E650 is a low temperature curing toughened resin system pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for the production of composite structures in the leisure and sporting industries and also for a range of engineering Applicationss. Toray E650 is compatible for co-cure with Toray’s low temperature cure resin film, Toray EF44, and Toray’s low temperature cure syntactic core, Toray MicroPly™ LT64.