Products

Kucryl TPA 64X/55 is a pure acrylic (styrene free) thermoplastic resin in mixed xylenes which has been specifically designed for use in quick drying exterior coatings requiring excellent yellowing and chemical resistance, gloss retention, toughness and durability whilst providing good water and salt spray resistance. Kucryl TPA 64X/55 has limited compatibility with film formers other than similar thermoplastic acrylics.

Kudec OFP 45S/65 is a saturated polyester in 3:1 Solvent Naphtha 100: Butyl Glycol mixed solvent and has been specifically designed for the formulation of economical coil coatings with very good exterior durability.

Kulac LLN 30W/70 is a Long Oil Alkyd based on linseed oil and aliphatic solvent and has been specifically formulated to for use in decorative primers, top coats, architectural industry and marine paints. Kulac LLN 30W/70 exhibits the degree of toughness, excellent outdoor durability, fast drying and hardness, while maintaining good gloss and yellowing resistance.

Kucryl TPA 44X/58 is a thermoplastic acrylic which has been specifically designed for use in low cost, quick drying, general purpose thermoplastic coatings. Kucryl TPA 44X/58 is tolerant to aliphatic solvents and provides quick drying coatings with good hardness and mar resistance. Kucryl TPA 44X/58 has limited compatibility with other film formers.

Kucryl TPA 60X/60 is a thermoplastic acrylic which has been specifically designed for use in low cost, quick drying, general purpose thermoplastic coatings. Kucryl TPA 60X/60 is tolerant to aliphatic solvents and provides quick drying coatings with good hardness and mar resistance. Kucryl TPA 60X/60 has limited compatibility with other film formers.

Kucryl TPA 22W/60 is a thermoplastic acrylic which has been specifically designed for use in economical architectural coatings. Kucryl TPA 22W/60 is white spirits tolerant and provides coatings with excellent moisture, alkali and fungal resistance. Kucryl TPA 22W/60 has limited compatibility with other film formers.

Kudec OFP 15S/70 is a saturated polyester in 4:1 Solvent Naphtha 100: Butyl Glycol and has been specifically designed for the formulation of coil coating enamels with excellent exterior durability.

Kulac LSN 52W/70 is a 70% solids long oil alkyd in white spirits formulated for use in quality architectural coatings exhibiting good gloss, durability and yellowing resistance. Kulac LSN 52W/70 was formerly manufactured and sold under the code of Kulac LOS 70WHV.

Kudec SSP 30S/70 is a short oil alkyd supplied in 3:1 Solvent Naphtha 150:Butyl Glycol and formulated to provide cost effective coil coating systems with good adhesion to mild steel substrates and salt spray resistance.

Kulac LSN 40W/70 is a 70% solids long oil alkyd in white spirits. Kulac LSN 40W/70 has been formulated for use in high quality architectural coatings when diluted with suitable solvents.

Kulac LSN 40N/100 is a ± 100% solids long oil alkyd containing only a small proportion of xylene used during processing. Kulac LSN 40N/100 has been formulated for use in high quality architectural coatings when diluted with a suitable solvent.

Kucryl TPA 77X/60 is a thermoplastic styrene acrylate which has been specifically designed for use in exterior architectural coatings subject to high temperatures and humidity especially where dust/sand pick up on the coating may be problematic. Kucryl TPA 77X/60 is aromatic solvent tolerant and provides coatings with excellent heat, moisture, alkali and fungal resistance. Kucryl TPA 77X/60 has limited compatibility with other film formers.

Kulac LSN 30W/70 is a 70% solids long oil alkyd in aliphatic solvent. Kulac LSN 30W/70 has been formulated for use in very high quality architectural coatings, especially those that require adherence to local Bureau of Standards specifications.