Products

SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBF0323HC is a high molecular weight grade produced using high-pressure technology. This product is specifically designed to create films with outstanding mechanical and optical properties. Moreover, it is additives-free and has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SEB853 is a low density polyethylene produced using high-pressure technology. This grade is specifically designed for film applications. Films made with SEB853 exhibit exceptional optical properties, excellent sealability, and low gel content. Additionally, this product is free from additives. With a minimum carbon biobased content of 95%, as determined by ASTM D6866, SEB853 aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's site

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

Tasnee LD 0725N is a Low Density Polyethylene with a Melt Flow Rate of 0.75 g/10min (190°C/2.16kg), recommended for mono and multilayer blown film extrusion. Tasnee LD 0725N is an additive free grade and has a suitable molecular structure to make film with excellent mechanical and optical properties. Tasnee LD 0725N can be easily processed on all types of extruders designed for polyethylene. The melt temperature is suggested to be in the range of 170 – 220°C. Excellent properties of the film are achieved with a blow-up ratio of 2:1 and recommended film thickness range from 25 to 100 μm.

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

Promyde® BF745 is a new experimental copolyamide without additives specially formulated for the production of cast and blown film.

Promyde® BF940 is a high viscosity polyamide without additives specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF940 can be processed in cast and blown film extruders. It is specially recommended in the inner polyamide layer in coextruded structures as PE/Tie/PA/Tie/PE. Promyde® BF940 minimizes curling, specific recommendations are available on request.

Lotrène® FE 3000 is an additive free grade produced by a tubular high pressure process mainly recommended for heavy duty film applications,.

Lotrène® FE 8000 is an additive free grade, produced by a high pressure tubular process, mainly recommended for light and medium duty film applications with good optical properties and medium rigidity.

Nizhnekamskneftekhim ABS Plastic 1035 is an easy flow, molding, heat-resistant grade with impact strength and temperature resistance during the process. It is an indigenous due to low yellow index and color resistance.It can be used mainly for production automobile internals, (extruded profile, interior finish and etc.) and with corresponding coating for external parts such as grids and looking-glasses. It is produced self-colored only, additives/ dye free.

EKFLEX 1200 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Lotrène® LA 0710 is mainly recommended for the extrusion coating at high speed. It contains no additive.

EKFLEX 1300 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

EKFLEX 2000 is a non-phthalate plasticizer that boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Lotrène® FB 3003 is an additive free grade, produced by an autoclave high pressure process, mainly recommended for heavy duty film applications.

Nizhnekamskneftekhim ABS Plastic 0445Е is an extruded grade of general purpose with a good rigidity-hardness balance. It is used for production of sheets with high quality surface (co-extruded or not and with high extrusion ratio), applicable for refrigerators, sanitary, packaging, automobile parts, consumer goods and furniture (profiles). It is produced self-colored only, free of additives and dye.

Indo-Nippon Chemical Di Octyl Phthalate (DOP) is a general-purpose plasticizer. It has good compatibility with PVC, possesses all properties required for PVC processing. It is superior in electrical performance. DOP is used as a plasticizer for PVC cables and wires, floor coverings, adhesives, leather cloth, films, calendars, perfume fixative, nitrocellulose, synthetic and natural rubber, many synthetic and natural resins, drying oils, etc., Indo-Nippon Chemical Co., Ltd. also manufactures DOP - Medical Grade with high purity, with very low free alcohol content, practically free of impurities and odor. DOP of this grade is free of any additives.

BRALEN RB 03-23 is a general purpose grade of low density polyethylene. It is characterized by high environmental stress cracking resistance and very good mechanical properties. This grade is additives free.

Nizhnekamskneftekhim ABS Plastic 2332 is an easy flow, molding grade with a good heat resistance during the process. It is used for production of household appliances, particularly, for complicated parts closed to heat source (front panel, washing machine frame). It is used for production of electrical goods as well. This grade is produced self-colored only, additives/dye free.

Promyde® BF845 L is a new experimental biobased copolyimide specially formulated for the production of cast and blown film. It is lubricated.

Nizhnekamskneftekhim ABS Plastic 0646 is an easy flow, molding, heat-resistant grade with impact strength and temperature resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals, (extruded profile, interior finish and etc.) and with corresponding coating for external parts such as grids and looking-glasses. It is produced self-colored only, additives/ dye free.

Promyde® BF840 is a new experimental biobased copolyamide without additives specially formulated for the production of cast and blown film. The renewable content of Promyde BF840 is 50%.

Promyde® BF845 is a new experimental biobased copolyamide without additives specially formulated for the production of cast and blown film. The renewable content of Promyde BF845 is 30%.

Nizhnekamskneftekhim ABS Plastic 0475Е is a grade with high impact strength applied for sheet extrusion. It is a good-processed grade with enhanced heat resistance intended for production of sheet extrusion (coextruded or not) for sanitary appliances and transport components. It is produced self-colored only, free of additives and dye.

Lotrène® FD 0270 is an additive free grade mainly recommended for the extrusion of thin film for light and medium duty applications.

BRALEN+ FC 08-13 is a film grade of low density polyethylene with increased density (MD LDPE). High rigidity, good optical properties and chemical resistance are typical for this grade. It is additives free.

BRALEN+ FB 4-31 is a film grade of low density polyethylene with good processability and optical properties. This grade is additives free.

Promyde® BF840 L is a new experimental biobased copolyimide specially formulated for the production of cast and blown film. It is lubricated.

Nizhnekamskneftekhim ABS Plastic 1534 is an easy flow, molding grade, with a medium heat resistance and impact strength, enhanced heat resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals. It is produced self-colored only, additives/ dye free.