Products

Bio-San C500 is a uniquely designed admixture for integral, long-term protection of concrete in sewage conditions with levels of H2S that cause microbial induced corrosion. Bio-San C500 combines potent antimicrobial protection along with the unique crystalline technology of the Xypex C-Series. Bio-San C500 contains bio-active mineral solids that become permanently fixed within the cement matrix impairing bio-film formation thus inhibiting the growth of acid causing sewer bacteria such as Thiobacillus due to a build-up of H2S. The unique Xypex Crystalline Technology creates a permanent structure throughout the pores and capillary tracts providing waterproofing and enhanced chemical protection including acid and sulfate resistance. Bio- San C500 inhibits microbial induced corrosion (MIC), stops infiltration/exfiltration of water, and provides acid and sulfate resistance, significantly extending the service life of concrete sewage collection systems and waste water infrastructure.

Admix C-1000 RED is added to the concrete mix at the time of batching. Admix C-1000 RED consists of Portland cement, very fine silica sand, a red oxide pigment and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions.

Admix C-500 NF RED is added to the concrete mix at the time of batching. Admix C-500 NF RED consists of Portland cement, a red oxide pigment and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions.