Products in Repair Adhesives

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

GENIOSIL® ZK 23 is a binder that utilizes a siloxane reinforced alpha-silane technology. It is specifically designed for coating and adhesive applications. Notably, its exceptional resistance to water provides opportunities for formulating plasticizer-free two-pack adhesives. GENIOSIL® ZK 23 is a transparent and low viscosity polymer. Once cured as a coating or adhesive, it exhibits high hardness values in the Shore D range.

The 8337 Speaker Service Cement is a flexible, durable, solvent-based, rubber resin adhesive that is designed for speaker repair.

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Fast Set Epoxy 8332 is a quick-set 2-part epoxy adhesive. Bonded parts need only be held together for eight to ten minutes before handling. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, woods, and most metals and plastics. This is a general-purpose adhesive suitable for household, industrial and manufacturing applications.

9310 is a 1-part, fast curing, electrically insulative epoxy adhesive. It is a smooth, thixotropic paste that stays in place without tailing when dispensed. This surface mount adhesive is specially designed for die attach applications in electronics assembly operations. It can be readily used in manual, pneumatic and robotic dispensing processes. It can also be used as a general-purpose adhesive for household, industrial and manufacturing applications. It has an unlimited working life at room temperature and does not require mixing or frozen storage.

VIVAPUR® Alginate FD 127 is a sodium alginate in form of a brown fine granule. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 127 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

U-355 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-600 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-75 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-180 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-53 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

VIVAPUR® Alginate FD 155 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 155 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

GP® BRSD-2112 coating/adhesive resin is a liquid heat-reactive phenolic-based resin solution.

U-500 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-90 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

VIVAPUR® HPMC K4M is a medium viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K4M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K4M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

U-63 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

VIVAPUR® Alginate FDG 155 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FDG 155 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

U-425 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-150 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-38 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

VIVAPUR® Pectin LC-S18XH is a water solvable pectin with a low degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LC-S18XH is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Alginate FD 176 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 176 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

U-106 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-710 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-250 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

PHENODUR® VPR 1740/50WA is a chemical family member of phenols and phenolics that is used in many different industries as a flexible binder and crosslinking agent. It is excellent at bonding and assembly in the automotive and transportation industries, especially in transportation assembly. This product stands out among adhesives and sealants for building and construction because it works well for construction adhesives. It also works well for craft and hobby projects and DIY and consumer repair adhesives. Its importance encompasses adhesives used in furniture manufacture, consumer products, industrial and assembly manufacturing, textile and footwear, and vehicle assembly.

VIVAPUR® HPMC K15M is a high viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K15M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K15M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Pectin LA-S20 VIS-YA is a water solvable amidated pectin in form of a beige powder. It can be used to form a thermo-reversable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LA-S20 VIS-YA is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Alginate FD 170 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 170 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

U-125 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

VIVAPUR® Pectin HS RV is a water solvable pectin with a high degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel under acidic conditions in the presence of high sugar concentrations. VIVAPUR® Pectin HS RV is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

U-300 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-45 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.

U-212 used in a variety of industries for maintaining a consistent space between objects, allowing for more repeatable results and fewer rejected parts.