Products in Adhesives & Sealants: Natural Rubbers (NR)

Shandong Fine Chemical Technology MBTS is a universal accelerator for natural rubber, synthetic rubber and reclaimed rubber. The properties of the product are similar to those made by accelerator M, the vulcanization critical temperature is higher than that of accelerator M, and it has significant after-effects. It can make the vulcanized rubber excellent in aging resistance. Mainly used for rubber products such as tires, inner tubes, hoses, tapes, and rubber shoes. Not suitable for the manufacture of rubber products in contact with food.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

Polytrade CarboBinder is a powerful powdered thermoplastic natural resin with high tackiness for solvent-based automotive sealants and adhesives.Our product has excellent compatibility with nitryl rubber and antioxidant agents. CarboBinder is soluble in several solvents, such as acetone, ethyl alcohol, and ethyl acetate. Once solubilized and mixed into formulations, this thermoplastic resin has a high resistance to ethyl alcohol and gasoline, making it a raw material ideal for applications in the automotive industry.

Bitoner Resin BT-1200H is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

SureTac 1970 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Bitoner Resin C-2120 include C5 modified C9 resin and C9 modified C5 resin.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Bitoner Resin TR-110 include C5 modified C9 resin and C9 modified C5 resin.

Mansil 190 is a ultra high surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.

C5 Petroleum Resin XD-1001L is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Mangalam Organics Limited TERPENE PHENOLIC RESIN DRT-100 are thermoplastic polymers manufactured by copolymerization of terpene hydrocarbons and phenol.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

Fushun Huaxing Petroleum Chemical HX-9100 is C5 aliphatic hydrocarbon resin based on purified piperylene. HX9100 hydrocarbon resin premium aliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers including EVA, APP, APAO, natural rubber, synthetic polyisoprene, polyisobutylene, SIS block copolymers and Butyl rubber. It could be used for EVA hot melt adhesives, hot melt PSA and other adhesives products.

RELEASE K100 DI DIL. 1,5 ECO is a polyvinylcarbamate in solvent solution. It does not contain aromatic solvents.

Puyang United Chemical C5 Petroleum Resin O-1304 is 100% C5 Aliphatic hydrocarbon resin. It's a general type C5 resin with narrow molecular weight distribution, designed for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). The major usages of 0-1304 are tackify a variety of adhesive polymers including SIS Block Polymers, EVA, natural rubber, synthe tic polyisoprene, polyis obutylene, butyl rubber and Butyl rubber.

Puyang United Chemical Liquid C5 Resin L2510 is a very unique liquid resin with low color and very narrow molecular weight distribution. It displays excellent compatibility with various polymers (NR, POE, APAO, SBC, EVA, ACRYLIC ect). It mainly provide low temperature tack and reduce the melt viscosity of hot melt adhesive. L-2510 used in PSA can avoid process oil migration in lower temperature since its low Tg. It's excellent low temperature properties assure PSA maximum performance and long shelf-life.

Puyang United Chemical C5 Petroleum Resin UCA100L is m-pentadiene based C5 Aliphatic hydrocarbon resin. It's general type C5 resin with narrow molecular weight distribution designed for hot melt adhesive(HMA) and hot melt pressure sensitive adhesive (HMPSA). The major usages of UCA100L are tackify a variety of adhesive polymers including SIS block copolymers, EVA, natural rubber, synthetic polyisoprene, polyisobutylene, and Butyl rubber.

Hitac Adhesives and Coatings RA-21S is a high total solids solution of a polyurethane release agent in a recoverable solvent. It offers significant improvements over other release agents, such as PVODC.

HIGREE™ HB1410 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It could be used for SIS , NR , SBS basis PSA ,and also owns good compatibility with EVA , APAO etc .It is suggested as tackifier for high quality hotmelt and hotmelt pressure sensitive adhesives.

RELEASE KB 100 DIL. 1,5 ECO is a polyvinylcarbamate in solvent solution. It does not contain aromatic solvents.

Fushun Huaxing Petroleum Chemical HX-1690 is suitable for hot-melting additives, (including quick packaging adhesives, book binding adhesives, wood adhesives and glue sticks, etc.) They have excellent compatibility with SIS, SBS ,EVA ,Natural Rubber and many kinds of synthetic rubbers. They provide enhanced performance in Hot Melt Adhesive applications.

SureTac 1525 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

Deqing Jiyuan Synthetic Resin MP-100L Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

HT9100 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9100 is a transparent granular solid with the color of yellow to light brown. HT9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

HIGREE™ CL6100 hydrocarbon resin premium aliphatic hydrocarbon resin which is designed to takcify a variety of adhesive polymers including EVA, Polyolefin , APAO, NR, SIS , butyl rubber etc. It could be used for hotmelt adhesives, solvent basis PSA and other adhesives products.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Mansil 160 is a medium surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.

Guangxi Zhongchang Resin RA100W resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance. Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

Yuron New Material Chlorinated Rubber(CR)-40 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

Shiraishi Kogyo Kaisha Hakuenka CC is our original Ultra-fine precipitated calcium carbonate coated with organic compounds. It was originally developed for reinforcing rubber materials in the early 20th century. Hakuenka CC has 50 nm uniformed ultra-fine particles as primary particle. These particles are surface treated with fatty acid in order to improve dispersion property at mixing stage with organic materials. Hakuenka CC is specially applied for construction application where Silicone & Polysulfide sealants are used. Hakuenka CC is commonly used as other application such as rubber, plastics and so forth.

Guangxi Zhongchang Resin RA100 resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance. Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

RELEASE PP 25 DIL. 2,5 is a polyvinylcarbamate in solvent solution.

Foreverest Resources Hydrogenated Rosin H106 is one of the dominant varieties of modified rosin with light color, high oxidation resistance and high thermal stability. It is soluble in ketones, esters, hydrocarbons, alcohols and chlorinated solvents and insoluble in water. Conjugated unsaturation of abietic resin acids can be removed through catalytic hydrogenation to overcome the shortcomings of oxidation and color degradation in rosin, is compatible in useful proportions with alkyds, natural and synthetic rubbers, natural resins, ethylcellulose; waxes; plastic polymers, elastomeric polymers, metallic pigments, and many other raw materials.