Products in Adhesives & Sealants: Silicones

SiSiB® FS-0380 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

XYSIL® 300 is a hydrophilic Fumed Silica with a specific surface area of 300m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

Shiraishi Kogyo Kaisha Hakuenka CC is our original Ultra-fine precipitated calcium carbonate coated with organic compounds. It was originally developed for reinforcing rubber materials in the early 20th century. Hakuenka CC has 50 nm uniformed ultra-fine particles as primary particle. These particles are surface treated with fatty acid in order to improve dispersion property at mixing stage with organic materials. Hakuenka CC is specially applied for construction application where Silicone & Polysulfide sealants are used. Hakuenka CC is commonly used as other application such as rubber, plastics and so forth.

Alteo LVSH3 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Reinste 206T is Used as a functional filler for polysulphide sealant.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

SiSiB® FS-0130 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 130 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

SiSiB® FS-0150 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 150 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

SiSiB® FS-0300 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Reinste 206M is Used as a functional filler for silicone sealant

Xysil® 150 is a hydrophilic fumed silica with a specific surface area of 150m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

Granifort® designed to be used polyurethane sealants, silicone, polysulfide, acrylics and plastisols provide high tixotropy and resistance to slump, allowing for a reduced consumption of tixotropic agents like precipitated calcium carbonate while improving its resistance to fire.

A-S-A® T-1800 is suitable to improve viscosity of modified silicone sealing material and adhesive and for prevention of slump and has high effect and temporal stability.

ALTON MF 4272 is a ready to use water dispersion of titanium dioxide. The special quality and stability of the dispersion, makes it a good alternative to the traditional pigment in powder.

XYSIL® R120B is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

SiSiB® FS-0250 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 250 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

XYSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

A-S-A® T-1700 is suitable to improve viscosity of solventless paint, modified silicone sealing material and adhesive and for prevention of slump and stably performs well at wide range of temperature.

Alteo SH30 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Xysil® 380 is a hydrophilic fumed silica with a specific surface area of 380m2 /g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

Silquest™ A-1110 silane, a primary amino silane, is a candidate for use as an adhesion promoter in silane modified urethane (SPUR* prepolymer), filled silicone, epoxy and 2 part urethane adhesives and sealants.

Sil-Co-Sil® is the high-purity content of our SIL-CO-SIL ground silica (at least 99.5% Si02) helps ensure consistent quality and color. Precision ground from 45-250 micron topsize, it’s available in multiple grades.

AKTIFIT VM is a SILFIT Z 91 coated with vinyl functional silane.

XYSIL® R170H is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 200m2/g.

Silquest™ A-186 silane adhesion promoter, can result in better electrical and/or mechanical properties in a variety of applications and industries. From enhancing electronic encapsulants to enabling improved sealant formulations, Silquest™ A-186 silane provides both epoxy and silane functionalities that promote adhesion in a range of formulations, including SPUR+ prepolymer, urethane, epoxy, silicone, and acrylic caulks, coatings, sealants and adhesives.

Ruisil Vinyltris(Isopropenyloxy)silane RJ-VIPS can be used as crosslinkers in RTV-1 silicone rubber.

Silquest™ A-1120N(beta-aminoethyl) gamma-aminopropyltrimethoxy-silane is diamino func tional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

The Micronized Products Mica 325# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Reinste 206S is Used as a functional filler for various adhesives and sealants such as silicone sealant, polyurethane sealants. Acrlylic sealants used in various construction, sanitary and industrial sectors.

ALTON ANTIFOAM 100 is an antifoaming agent for paper impregnation processes to directly add to any water-based resin system, it provides a reliable foam control.

Silquest™ A-187 silane is specially formulated for use as an adhesion promoter in SPUR + * prepolymer, urethane, epoxy, polysulfide, silicone and acrylic systems for caulks, coatings, sealants and adhesives. Its epoxy functionality allows Silquest™ A-187 silane to perform as a durable epoxy ring that is reactive with many organic functions. It also offers non-yellowing adhesion in many resin systems and has proven to increase the flexibility of systems when compared to other adhesion promoters under certain conditions.