Products in Industrial & Assembly Adhesives: Binder & Resin

Calprene 710 is a 70/30 linear structure butadiene/styrene thermoplastic copolymer, polymerized in solution.This product is presented in porous pellet form that allows rapid oil absorption.It is stabilized with a non-staining antioxidant system (free of TNPP), that is FDA approved for use in food contact applications. It is essentially gel free and very transparent.

Photomer® 5050 is a low-viscosity, multifunctional resin for use in UV/EB curable systems. The low viscosity of this oligomer allows a wide formulating latitude. This resin also exhibits low odor and very high cure-speed.

BLENDEX S 12 DRY is a thermoplastic polyurethane, with a minimum reactivation temperature of 70°C. The product features a long open time and good thermal resistance.

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Eurovac DSW V2 is cost effective base dispersion for textile and fiber coating and consolidation, partially cross-linked

Photomer® 3016-25G is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

Coating P. Materials CX-6041 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

POLYTONE™ AP 110 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

PHOTOMER® 6720 is a low viscosity hexa-functional aromatic urethane acrylate oligomer.

Nippon Carbide Industries Nissetsu is acrylic polymer solution resin. It is used for adhesives and cross-linking　agents, will widely answer customer’s purpose and needs.

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Guangxi Zhongchang Resin RPF100A series resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance.Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

POLYTONE™ AP 133 is a non heat reactive thermoplastic unmodified phenolic resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

Daikalac 5550B is a solution type of synthetic resin obtained by the polymerization of monomers such as vinyl acetate, acrylic ester and styrene in the presence of a solvent such as ethyl acetate and methanol.

PHOTOMER® 6628 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings.

PHOTOMER® 3016-20G is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 5500 is a hyper branched polyester acrylate which exhibits of high functionality (12 – 15) with relatively low viscosity. It provides low shrinkage, good toughness and fast cure speed.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Photomer 6024 is an aliphatic urethane diacrylate oligomer which exhibits, good flexibility, yellowing resistance and good UV/EB cure reactivity.

Hot polymerized SBR 1009 is recommended for use in calendared products such as slab soling for footwear, and in extruded mechanical goods where smoothness and controlled shrinkage are critical requirements. It is also widely used in sealants and adhesives.

UNI-REZ 2532 (formerly UNI-REZ E3525) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2532 with the alkyd resin at temperatures between 210-230°C. UNI-REZ 2532 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy. UNI-REZ 2532 forms very strong and rigid thixotropic gels that are resistant to high levels of polar solvents.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

Coating P. Materials CX-6038K is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

FiberStar® P is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. FiberStar P is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. FiberStar P is an excellent product for binding and adhesive applications where economics is important. FiberStar P is a cost-effective corn-based product with excellent binding and adhesion properties.

CarboGasket Flake is a thermoplastic natural resin soluble in ethanol and has a high adhesive capacity for gasket sealant formulations. Our product is soluble in ethanol and due to its flaked form, has an easy solubility. CarboGasket Flake is also compatible with nitryl rubber, providing excellent balance and performance as a vehicle of metal to metal adhesion.

Coating P. Materials CX-6800M is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

POLYTONE™ AP 113 is a heat reactive alkyl phenolic resin formulated for use cross linking of butyl rubber mainly used in the tire industry

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

MOBECOL 505/35 is water-based Polyvinyl Acetate Homopolymer.

Hot polymerized SBR 4503C is used in construction mastics, adhesives and sealants intended for installing panels, furring strips, wood molding, plywood or hardboard. It offers a strong and instant bond that retains precise placement. It exhibits excellent shear strength and yields a stiffer film when used in tape, PSA or label application.

Photomer 5442 is a modified polyester for printing inks. Photomer 5442 exhibits excellent pigment wetting and good flexibility.