Products in Industrial & Assembly Adhesives: Urethane Acrylates

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Crestomer® 1150PA is a two-part, pre-accelerated, highly thixotropic structural adhesive that is based on unsaturated urethane-acrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood, and some metals. This product can be used for bonding diesel tanks, contour joints in FRP components, building up damaged areas, and bonding "green" FRP.

Crestomer® 1196PA Structural Adhesive is a low-density, high-performance structural core adhesive with good gap-filling properties. This product is based on Scott Bader's innovative urethane acrylate technology and is used in sandwich construction where strong, tough, highly impact-resistant structures are required. Compared to other core bonding methods, this product has reduced print through, reduced weight, and outstanding adhesion. It has Lloyds' approval and can be used to bond many substrates. This product has been formulated to bond core materials such as rigid PVC foam and balsa to cured or semi-cured FRP skins. Using Crestomer® 1196PA gives a significantly tougher and more durable structural bond than a polyester resin/glass structure or polyester bonding adhesive. In addition, it provides significant weight savings, reduced styrene emissions, and greatly improved cosmetics with the elimination of core print-through.

Crestomer® Advantage 10 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a fast gel time of 10 minutes, with a workable time of 70 minutes for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Crestomer® 1186PA Structural Adhesive is a multi-purpose structural adhesive with exceptional adhesion to a wide range of metals, ceramics, and polymeric materials. In addition, it exhibits superior properties for impact resistance and resistance to crack propagation when compared to polyester bonding pastes. This product is pre-accelerated and maintains a high-strength structural bond even when used as a gap filler with non-slumping and low-odor properties. It has been certified by Lloyds.

Crestomer® Advantage 60 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a gel time of 60 minutes, with a workable time of 3 hours for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Crestomer® Advantage 30 Structural Adhesive is a white, high-performance structural adhesive offering the same advantages as Crestomer® 1151A but in a more convenient, pre-packed 380ml co-axial cartridge. It is particularly suitable for marine applications and has Lloyd's approval. The opaque white color of the adhesive blends well aesthetically with cosmetically sensitive applications.

Crestomer® 1152PA Structural Adhesive provides high performance and is designed for demanding applications. It creates tough bonds with greater movement and allows for significant time, cost, and weight savings. This product has reduced styrene emissions, and it greatly improves cosmetics. It can be used to bond many substrates and has certified approvals from Lloyds, DNV, and RINA.

PHOTOMER® 6720 is a low viscosity hexa-functional aromatic urethane acrylate oligomer.

PHOTOMER® 6892 is a proprietary low viscosity trifunctional aliphatic urethane acrylate that can be used to formulate low viscosity systems while maintaining high oligomeric concentrations. PHOTOMER® 6892 imparts flexibility into UV/EB cured coatings and inks.

PHOTOMER® 6621 is a tin free, hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure performance in addition PHOTOMER® 6621 exhibit high hardness and solvent resistance

PHOTOMER® 6628 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings.

Photomer 6024 is an aliphatic urethane diacrylate oligomer which exhibits, good flexibility, yellowing resistance and good UV/EB cure reactivity.

PHOTOMER® 6019 is a proprietary, non-yellowing aliphatic urethane oligomer developed for UV/EB curable systems. This medium viscosity acrylate resin exhibits good adhesion to flexible plastics, metal and glass. It is Recommended as a primary oligomer for secondary coatings in optical fibers, fiber-optic sensors and light pipes. Excellent weatherability, scratch, scuff and mar resistance are characteristics of this oligomer.

PHOTOMER® 6630 is a di-functional aliphatic urethane acrylate oligomers.

PHOTOMER® 6644 is a non yellowing di functional aliphatic urethane acrylate, which exhibits of excellent flexibility and elongation.

PHOTOMER® 6692 is a non-yellowing hexa-functional petia free and tin free aliphatic urethane acrylate with relatively low viscosity. It exhibits of excellent adhesion and scratch resistance.

PHOTOMER® 6643 is a di functional aliphatic urethane acrylate, which exhibits of good abrasion resistance, non-yellowing, and excellent flexibility and elongation.

PHOTOMER® 6645 is a non yellowing di functional aliphatic urethane acrylate, which exhibits of excellent flexibility and elongation.

Photomer® 6230 is a proprietary, high molecular weight non-yellowing aliphatic urethane developed for radiation curable systems. This premium medium viscosity urethane acrylate allows formulators wide formulating latitude, permits higher oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastics, paper and vinyl substrates.

PHOTOMER® 6215 is a high reactive aliphatic polyester urethane acrylate. This product has high mechanical properties and a very good flexibility.

PHOTOMER 6893-19E is a low viscosity, non-volatile, proprietary aliphatic urethane acrylate oligomer that is diluted with 19% of PHOTOMER 4211 (EOEOEA) for ease of handling.

PHOTOMER® 6891 is a proprietary low viscosity difunctional aliphatic urethane acrylate that can be used to formulate low viscosity systems while maintaining high oligomeric concentrations. PHOTOMER® 6891 imparts flexibility into UV/EB cured coatings and inks.