Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Adhesives & Sealants
Packaging & Paper
Products in Packaging & Paper
1,707 Products found in Packaging & Paper
Browse
Applications
Show All 6 Categories
Filters
Product Families
Suppliers
Functions
Chemical Family
End Uses
Compatible Polymers & Resins
Products
Brands
Suppliers
Formulations
Documents
Relevance
Scott Bader
Texicryl® 13-814
Applications:
Offset & Lithographic Printing, Bookbinding, Bookbinding Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Offset Ink, Waterborne Coating, Other Ink Types
Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.
Scott Bader
Texicryl® 13-819
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Other Ink Types, Varnishes, Waterborne Coating
Compatible Substrates & Surfaces:
Plastics
Glass Transition Temperature (Tg):
93.0 - 93.0 °C
Features:
High Gloss, Blocking Resistance, Heat Resistance
Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.
Scott Bader
Texicryl® 13-813
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Other Ink Types, Varnishes, Waterborne Coating
Glass Transition Temperature (Tg):
-9.0 - -9.0 °C
Features:
High Gloss, Good Film Former
Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.
Scott Bader
Texicryl® 13-607
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Glass Transition Temperature (Tg):
12.0 - 12.0 °C
Features:
Low VOC
Texicryl® 13-607 is a pure acrylic copolymer emulsion designed for use in a broad range of formulations requiring low VOC, low water uptake and excellent water whitening resistance. It is designed for use in artist’s color formulations as well as for low VOC interior and exterior coating systems. It also shows good water blanching resistance.
Scott Bader
Texicryl® 13-217
Functions:
Binder & Resin, Binder
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Textiles
Features:
Self Crosslinking, Excellent Water Wash Capabilities, Good Film Former
Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.
Scott Bader
Texicryl® 13-809
Applications:
Bookbinding, Bookbinding Adhesives, Food & Beverage Packaging
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating, Waterborne Ink, Other Ink Types
Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.
Scott Bader
Texicryl® 13-824
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Glass Transition Temperature (Tg):
66.0 - 66.0 °C
Features:
Excellent Adhesion
Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.
Scott Bader
Texicryl® 13-224
Functions:
Binder & Resin, Binder
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
Compatible Substrates & Surfaces:
Textiles
Features:
Excellent Pigment Binding Capacity, Self Crosslinking, Abrasion Resistance
Texicryl® 13-224 is a self crosslinking styrene acrylic copolymer emulsion with soft handle and good wet scrub resistance properties. It gives excellent binding properties for pigment printing of textiles. It maybe used on both rotary as well as flat frameworks.
Scott Bader
Texicryl® 13-023
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Tile Adhesive
Compatible Substrates & Surfaces:
Ceramic, Tile
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Features:
Excellent Adhesion, Water Resistance
Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.
Scott Bader
Texicryl® 13-319
Functions:
Binder & Resin, Rheology Modifier, Thickener, Viscosity Modifier
Chemical Family:
HASE Thickener, Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood
Physical Form:
Dispersion, Emulsion, Liquid
Texicryl® 13-319 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.
Scott Bader
Texicryl® 4025
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Paper
Glass Transition Temperature (Tg):
20.0 - 20.0 °C
Features:
Good Heat Stability, Blocking Resistance
Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. This emulsion is cross-linkable with thermoset resins, compatable with solvents and other resin systems. It is suitable for inks used on absorbent substrates such as packaging materials and wallpapers. It can also be used in bottle labeling adhesives.
Scott Bader
Crestakyd® 10-3000
Applications:
Bookbinding, Bookbinding Adhesives, Marine
Product Families:
Alkyds, Resins & Binders
Chemical Family:
Alkyds (Long Oil)
End Uses:
Undercoat, Enamel, Varnishes
Crestakyd® 10-3000 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It is used for interior and exterior decorative enamels, marine and topside paints. Also suitable for undercoats, maintenance primers and floor varnishes.
Scott Bader
Texicryl® 13-812
Applications:
Bookbinding, Bookbinding Adhesives, Flexography
Product Families:
Acrylics, Functional Additives, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
Scott Bader
Texicryl® 13-828
Functions:
Binder & Resin, Grinding Aid
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-828 is a highly efficient alkali swellable emulsion designed for water-based printing ink formulations. The product has been designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
AGC Chemicals Americas, Inc.
Fluon® PTFE CD127E
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Calendering, Extrusion
Additives Included:
Thermal Stabilizer
AGC Chemicals Americas, Inc. Fluon® PTFE CD127E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD127E do not use ammonium salts of perfluorooctanoic acid (PFOA), making them an environmentally friendly option. They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires, making them ideal for a wide range of industrial applications.
AGC Chemicals Americas, Inc.
Fluon® ETFE C-88AXP
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Injection Molding, Rotational Molding, Extrusion, Blow Molding
Flexural Modulus:
869.1735 - 869.1735 MPa
AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.
AGC Chemicals Americas, Inc.
Fluon® PTFE G350
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Isostatic Molding, Injection Molding, Compression Molding
AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.
AGC Chemicals Americas, Inc.
Fluon® PTFE G155
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Injection Molding
AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.
AGC Chemicals Americas, Inc.
Fluon® PTFE CD141E
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Extrusion, Calendering
AGC Chemicals Americas, Inc. Fluon® PTFE CD141E is a white, free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. The homopolymer CD141E has a medium molecular weight and is not produced using perfluorooctanoic acid ammonium salts (PFOA). This product has been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.
AGC Chemicals Americas, Inc.
Fluon® PTFE G355
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Isostatic Molding, Injection Molding, Compression Molding
AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.
AGC Chemicals Americas, Inc.
Fluon® ETFE C88AXMP-HT
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Rotational Molding, Extrusion, Blow Molding, Injection Molding
AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.
AGC Chemicals Americas, Inc.
Fluon® ETFE C-55AXP
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Rotational Molding, Extrusion, Blow Molding, Injection Molding
Flexural Modulus:
929.1165 - 929.1165 MPa
AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.
AGC Chemicals Americas, Inc.
Fluon® ETFE C-88AXMP
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Rotational Molding, Extrusion, Blow Molding, Injection Molding
Flexural Modulus:
889.1545 - 889.1545 MPa
AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.
AGC Chemicals Americas, Inc.
Fluon® ETFE C-55AP
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Injection Molding, Rotational Molding, Extrusion, Blow Molding
Flexural Modulus:
959.088 - 959.088 MPa
AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 102H
Applications:
Bookbinding, Construction Adhesives, Flexible Packaging Adhesives
Product Families:
Other Resins & Binders, Resins & Binders
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Flyeva 102H is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 102
Applications:
Bookbinding, Construction Adhesives, Flexible Packaging Adhesives
Product Families:
Other Resins & Binders, Resins & Binders
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Flyeva 102 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 101
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Compatible Substrates & Surfaces:
Metal, Wood, Plastics, Paper
Features:
Excellent Adhesion, Mechanically Stable
Flyeva 101 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
Guepo GmbH
Gupotim A -21
Functions:
Filler
Chemical Family:
Aluminum Compounds
Features:
Good Abrasion Resistance, Excellent Filling Properties, Thermally Conductive, Electrically Insulating
End Uses:
Film, Hoses, Caps
Gupotim A -21 is a thermally conductive, electrically insulating aluminum oxide filler.
AGC Chemicals Americas, Inc.
Fluon® PTFE G163
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Injection Molding
AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.
AGC Chemicals Americas, Inc.
Fluon® PTFE CD123E
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Calendering, Extrusion
Additives Included:
Thermal Stabilizer
AGC Chemicals Americas, Inc. Fluon® PTFE CD123E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD123E do not use ammonium salts of perfluorooctanoic acid (PFOA). They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.
AGC Chemicals Americas, Inc.
Fluon+™ PFA EA-2000
Polymer Name:
Perfluoroalkoxy Polymer (PFA)
Processing Methods:
Coextrusion
Flexural Modulus:
640.0 - 640.0 MPa
AGC Chemicals Americas, Inc. Fluon+™ PFA EA-2000 is a perfluoro resin which has been functionalized to include an adhesive group within the polymer backbone. The perfluoro backbone gives the material excellent electrical characteristics, and heat and chemical resistance, while the adhesive functionality facilitates adhesion to other materials in a one-step process, without the need for surface treatment or a separate adhesive layer. Example materials include glass cloth, polyimide, or various metals. This grade is semi-commercialized and may be available upon request. This material is supplied as pellets and packaged in 25kg plastic bags.
Sanyo Chemical America Incorporated
POLYTHICK SC75
Functions:
Curing Agent
Chemical Family:
Acrylics, Acrylates & Methacrylates
POLYTHICK SC-75 is a curing agent in a two-component type pressure-sensitive adhesive suitable for use in the production of paper, synthetic paper, polyester film self-adhesive labels and double-sided adhesive tapes. This product is applicable particularly to paper and synthetic paper labels used for frozen foods, due to its high adhesive strength and excellent tackiness even on wet surfaces and at low temperatures.
Mallard Creek Polymers
Rovene® 8305
Glass Transition Temperature (Tg):
-24.0 - -24.0 °C
Rovene 8305 is a high gel content, non-carboxylated styrene-butadiene emulsion recommended for flooring adhesives. These adhesives can be formulated to require exceptional uncured shear strength, pH tolerance and water resistance. Rovene 8305 can be greatly extened with oils and fillers in high solids formulations. Compatibility with commerical tackifier resins is excellent, as is filler tolerance. Dry films offer excellent water resistance, adhesion and high shear strength.
Mallard Creek Polymers
Rovene® 4813
Glass Transition Temperature (Tg):
-42.0 - -42.0 °C
Rovene 4813 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. Rovene 4813 is a high gel content, hot polymerized latex designed with excellent shear stability and high tolerance for fillers and pH shock. Its soft films yield adhesives with good tack and no adhesion build for use in removables. Rovene 4813 is easily tackified and gives high peel and shear strengths in adhesives and mastics. This product is also sprayable.
Mallard Creek Polymers
Rovene® 6091
Glass Transition Temperature (Tg):
39.0 - 39.0 °C
Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack. Rovene 6091 is recommended as a blending component for Rovene 6090 to modify the degree of adhesive release. This fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with easy release. Features: Firm hand High riding Fast drying Low TMLI release values (easy release) Excellent mechanical stability
Mallard Creek Polymers
Rovene® 4111
Glass Transition Temperature (Tg):
69.0 - 69.0 °C
Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide. Rovene 4111 was designed with a specific particle size that greatly improves the spacing between titanium dioxide particles resulting in increased opacity. Additionally, using Rovene 4111 may allow a formulator to reduce the level of titanium dioxide in an ink formulation.
Show
36
of 1,707 results
Go to page
1
2
3
4
5
6
7
8
9
10