Packaging & Paper

INVISTA

Dytek® BHMT

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Kuraray

Kuraray Poval™ 49-88

KURARAY POVAL™ 49-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. This grade is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 49-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

Kuraray

Kuraray Poval™ 3-80

KURARAY POVAL™ 3-80 (Old name: PVA 403) by Kuraray is polyvinyl alcohol with colloid-chemical and excellent film-forming properties, and a high tensile strength. KURARAY POVAL™ 3-80 is used as a component of remoistenable adhesives, e.g. for postage stamps. In addition, the polymers are highly elastic and resistant to heat and organic solvents. Above all, the range of applications is based on the chemical properties, especially on the reactivity of the numerous hydroxyl groups with substances such as reactive resins, aldehydes and other reactive compounds.

INVISTA

Dytek® BHMT-HP

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

Tosoh Corporation

Nipoflex® 720

Nipoflex® 720 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 720 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Kuraray

Kuraray Poval™ 25-98 R

KURARAY POVAL™ 25-98 R by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. Its molecular structure contains peculiar functional groups that is silanol groups. The silanol groups are reactive with inorganic substances such as silica or alumina. KURARAY POVAL™ 25-98 R can be applied with inorganic substances to form water resistant films. Recommended for adhesives.

Kuraray

Kuraray Poval™ 22-88 S2

KURARAY POVAL™ 22-88 S2 (formerly KURARAY POVAL™ PVA-217S) by Kuraray is a water soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. It provides extension of the open time, increase of the setting speed and influence on the rheology. KURARAY POVAL™ 22-88 S2 is recommended for the modification of emulsion adhesives.

Tosoh Corporation

Nipoflex® 710

Nipoflex® 710 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 710 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Kraton

UNI-REZ™ 2930

UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Tosoh Corporation

Nipoflex® 722

Nipoflex® 722 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 722 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Kolon Industries

SUKOREZ® SU-640

Kolon Industries SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kuraray

Kuraray Poval™ 8-88

KURARAY POVAL™ 8-88 by Kuraray is a polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is notable for its good bonding strength and pigment binding capacity because PVAs have such good cohesion and good adhesion to fibers, fillers as well as pigments. KURARAY POVAL™ 8-88 is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material for the production of aqueous adhesive solution. In comparison to dextrin and casein it has the advantage of a more uniform chemical structure and greater adhesion, being obtained with minimum raw material requirements. It features water-solubility, excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. It is biodegradable and recyclable. KURARAY POVAL™ 8-88 is used in producing silicon base paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.

Kraton

UNI-REZ™ 110

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

Kuraray

Kuraray Poval™ 4-98

KURARAY POVAL™ 4-98 (formerly Mowiol® 4-98) by Kuraray is a fully saponified polyvinyl alcohol having varying degree of polymerization and hydrolysis. It is an odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It provides high cohesion, toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 4-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Kuraray

ELVANOL™ 90-50

Elvanol™ 90-50 by Kuraray is a fully hydrolyzed, medium-to-low viscosity polyvinyl alcohol. Provides high film strength and binding power in relatively low -viscosity systems. Offers oil-, grease-, water and solvent resistance. It combines efficient binding with excellent high shear rheology, controls backside lint and surface debris and provides superior holdout. It is compatible with modified starches. Used in adhesives for porous substrates including paper and paperboard, hot-water soluble film, and as a binder for pigments or other solid particles. It is particularly useful as a pigment binder for ceiling tile primers. Elvanol™ 90-50 complies with FDA regulation.

Monument Chemical

Monument Chemical Tetrahydrofuran (THF)

Monument Chemical Tetrahydrofuran (THF) is a clear, colorless liquid with an ether‐like odor. The principal end uses of THF include PTMEG, pharmaceutical solvent, adhesives, PVC cement and magnetic tape. Due to its' tendency to form peroxides during storage, THF is inhibited with BHT.

Tosoh Corporation

Nipoflex® 633

Nipoflex® 633 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 633 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Kuraray

Kuraray Poval™ 10-98

KURARAY POVAL™ 10-98 (formerly Mowiol® 10-98) by Kuraray is a fully saponified, odorless, water-soluble polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. Shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Exhibits good penetration capacity and good adhesion properties. Offers high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 10-98 is suitable for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

VYNOVA

VYNOVA™ S6502

VYNOVA™ S6502 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering of both rigid and flexible PVC articles: profiles, sheets & films, compounds, and flooring.

AdvanSix

AdvanSix Technical Acetone

AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

Kraton

UNI-REZ™ 111

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kuraray

Kuraray Poval™ 4-88

KURARAY POVAL™ 4-88 by Kuraray is polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. It is a water-soluble, partially saponified, odorless polymer. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Applicable for use in remoistenable adhesives. KURARAY POVAL™ 4-88 conforms to EU Directive 67/548/EC.

Kuraray

Kuraray Poval™ 5-88

KURARAY POVAL™ 5-88 by Kuraray is a partially hydrolyzed polyvinyl alcohol (PVOH) grade. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It exhibits good bonding strength and pigment binding capacity. It is used as an adhesive promoter. It provides good cohesion and adhesion to fibers, fillers and pigments. This grade is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 5-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology.

Kuraray

Kuraray Poval™ 26-88

KURARAY POVAL™ 26-88 is a partially saponified polyvinyl alcohol (PVOH) grade by Kuraray. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It possesses good cohesion and adhesion to fibers, fillers and pigments. It offers good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 26-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology.

Cosmo Chemical

COTIOX KA-100

Cotiox KA-100 is a titanium dioxide anatase type general grade. TiO2 has remarkable whiteness and tint strength for general use Best-quality anatase in the world.

Kuraray

Kuraray Poval™ LM-10HD

Kuraray Poval™ LM-10HD by Kuraray is an ultra-low saponified polyvinyl alcohol (PVOH) grade. This grade is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ LM-10 HD can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It can be stored for 12 months. Complies with EU Directive 67/548/EC regulation.

Bitoner Resin

Bitoner Resin BT-1115

Bitoner Resin BT-1115 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Kuraray

Kuraray Poval™ 22-88

KURARAY POVAL™ 22-88 is a partially hydrolyzed polyvinyl alcohol (PVOH) grade by Kuraray. It exhibits good bonding strength and pigment binding capacity. It offers good cohesion and adhesion to fibers, fillers and pigments. It is designed for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used as an adhesive promoter. It can be added to polymer emulsion to extend the open time, increase setting speed and influence the rheology. KURARAY POVAL™ 22-88 is recommended for use in postage stamps and labels.

Kuraray

Kuraray Poval™ 5-88 S2

KURARAY POVAL™ 5-88 S2 by Kuraray is a fine powder polyvinyl alcohol (PVOH) grade. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 5-88 S2 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

Kraton

SYLVALITE™ RE 85GB

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

Advanced Petrochemical Company

Advanced-PP 1102K

Advanced-PP 1102K is a polypropylene homopolymer for extrusion and thermoforming applications.extremely low water carry-over is a special advantage for the production of raffia tapes.

Tosoh Corporation

Nipoflex® 630

Nipoflex® 630 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 630 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Munzing

AGITAN® DF 6420

AGITAN DF 6420 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily disperses in most organic solvents.

Kraton

SYLVARES™ TP 7042

SYLVARES TP 7042 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

Kuraray

Kuraray Poval™ 40-88

KURARAY POVAL™ 40-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It possesses good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It provides good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 40-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels. Complies with EU Directive 67/548/EC regulation.

Velsicol

Velsiflex® 342

Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.