Products in Fuel Systems: Thermoplastic Elastomer (unspecified)

Elastocon® 3353 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3353 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3353 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3353 is supplied as ready to use pellets in 50 lb. bag quantities.

TPRR® 070 is a TPRR (Thermoplastic recycled rubber) material consisting mainly of recycled plastics and recycled rubber where 85% recycled content is including recycled car tires.

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Norprene A70G is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A70G include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Reprocessable Valves - seals, Grommets, Under Hood Applications Ozone resistance, Superior

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Norprene A70F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A70F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

A red/brown high performance polymer containing a unique self- reinforcing polymer structure, developed specifically for aggressive semiconductor applications. The high purity of the polymer combined with the absence of any fillers makes this polymer suitable for processes involving lower feature sizes. This material has a low coefficient of thermal expansion, low compression set and has an extremely low etch rate in aggressive plasma environments.Key Attributes Exceptionally pure - does not contain any fillers which may cause particulation problems. Outstanding plasma resistance - ideal for Chlorine, Fluorine & Oxygen chemistries. Exceptionally low plasma etch rate Low thermal expansion Retro-fits existing O-ring grooves (including FKM & FFKM grooves) Low permeation Low out-gassing Low adhesion (reduced sticking) Typical Applications Dynamic seals Static seals Wafer-handling products

Elastocon® 3360 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3360 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3360 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3360 is supplied as ready to use pellets in 50 lb. bag quantities.

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

TPRR® 450 is a TPRR (Thermoplastic recycled rubber) material consisting mainly of recycled plastics and recycled rubber. It consists good replacement for polyolefin materials with food flowability.

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Ozone resistance, Superior

Norprene A60G is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60G include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Da/Pro Rubber TPE elastomers add soft-touch grips, high tech looks, multiple color capability, scents, surface textures and more to a variety of components. TPE elastomer molding is being used in consumer products, industrial products, medical device components, electrical products and in almost every other industry.

Moharamplast TPE is a fully recyclable material with properties similar to rubber. TPE can cope with different weather conditions from freezing cold to extreme heat.It gives a much smoother surface appearance, a faster extrusion process and takes up less space compared to rubber extrusion processes. TPE can be processed in all plastic process machines,that it has low density and don’t need to be vulcanized, which makes it easy for us to create your own requested product according to your application. TPE has qualities that combine the properties of rubber with the molding capabilities of thermoplastics.

A brown colored high performance polymer containing a unique self- reinforcing polymer structure, developed specifically for aggressive semiconductor applications. The high purity of the polymer combined with the absence of any fillers makes this polymer suitable for processes involving lower feature sizes. This material has a low coefficient of thermal expansion, low compression set and has an extremely low etch rate in aggressive plasma environments.Kimura® K23X can be fully molded into custom shapes and O-rings (from 6.07mm/0.24" ID & 1.78mm/0.07" CS up to 600mm/23.6" ID & 10mm/0.39" CS).Key Attributes Exceptionally pure - does not contain any fillers which may cause particulation problems. Low modulus ensures excellent sealing characteristics Outstanding plasma resistance - ideal for Chlorine, Fluorine & Oxygen chemistries. Exceptionally low plasma etch rate Low thermal expansion Retro-fits existing O-ring grooves (including FKM & FFKM grooves) Low permeation Low out-gassing Low adhesion (reduced sticking) Typical Applications Dynamic seals Static seals Wafer-handling products

A durable, rubber-like material with good tear resistance and burst strengthApplications Gaskets, hoses and seals Athletic footwear Ear molds "Soft-touch," over molded grips Features Rubber-like flexibility Durable and tear-resistant Resists harsh environments Good long-term stability Excellent surface finish and feature detail Create colored parts using standard infiltrants Benefits Rapidly produce parts with the look and feel of rubber and thermoplastic elastomers Eliminate the time and cost of casting, machining or other secondary processes Address broad applications requiring rubber-like flexibility and durability Address end-use applications requiring long-term stability Minimal finishing required Reduced cost per part