Products in Interior: Mold Release Agent

ST-PETS is a formulated lubricant, with long chain fatty acids such as stearic acid, also called pentaerythritol tetrastearate or simply PETS, which are a class of polymer additives with a strong release effect It can be used as processing additive surface modifier and a mold release agent in PC and other thermoplastics. It can improve the flowability, surface glossiness and reduce the friction factor.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

The extensive use of petroleum-derived polymers is responsible for the increasing concern about the environmental impact of plastics, since most of them are not biodegradable. Worldwide polymer production is estimated to increase: it is considered that in 2020 each person will consume around 40 kg of plastic annually. In this scenario, bioplastics emerge as an alternative to conventional plastics and among biopolymers VIBATAN® PLA BLACK N0381) is currently considered one of the most promising biopolyester at industrial scale, due to its good balance between physicochemical properties and sustainability.

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

Stoner, Inc. E204 Light Duty Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It produces a very light, dry mist coating which reduces over-application and buildup on molds.

MoldWiz® INT-1312MS - A Methanol – low water tolerant resin systems

MoldWiz® INT-1681OG - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, printing, bonding, or plating.

Stoner, Inc. E218 Extra Heavy Duty Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Even the most stubborn, sticking parts release faster and easier with E218, our heaviest viscosity mold release.

Stoner, Inc. A373 Fluoroelastomer Mold Release Fluoroelastomer Mold Release is a semi-permanent, fast curing release for fluorels, vitons and other fluorocarbons. It provides a permanent yet removable, thin-layer, anti-stick mold surface coating for fast, easy part removal from molds.

Stoner, Inc.E202 Dry Mist Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Produces a very light, dry mist coating which reduces over-application and buildup on molds. It's ideal when minimal release agent is required.

Stoner, Inc. A353 Endurance Mold Release is a semi-permanent, fast curing release for all elastomers including EPDM, nitrile, and neoprene. It provides a thin, anti-stick mold surface coating for fast, easy part removal from molds.

Universal Colorant Company Silicone Masterbatch is formulated with polyethylene in which poly-dimethyl-siloxane additives with ultra-high molecular weight are dispersed properly. This type of masterbatch is specifically used for enhancing the abrasion resistance in the end products along with imparting lubricity and minimizing lowering coefficient of friction. Silicone Masterbatch is formulated with polyethylene in which poly-dimethyl-siloxane additives with ultra-high molecular weight are dispersed properly. This type of masterbatch is specifically used for enhancing the abrasion resistance in the end products along with imparting lubricity and minimizing lowering coefficient of friction.

MoldWiz® FFIH - A film forming combination release agent and barrier coat that dries at room temperature. For use on all types of molds. When used on RTV molds, acts as a protective barrier coat greatly extending the life of the molds. The film which is formed on the mold transfers to the molded foam during the curing cycle and acts as a primer for subsequent painting or can be washed off in a water bath, if desired. Does not contain any silicones or waxes and will not interfere with any secondary operations such as decorating, bonding, plating, etc. No necessity for washing of molds between applications.