Products in Other Automotive Applications: Polyurethane (unspecified)

Texalan® 365A product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and bending resistance foldability.

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

Texalan® 390A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A

MB 1200 is an Apricot and/or Pink colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1200 is low density foam of approximately 20lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1200 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

Texalan® 370A product has excellent abrasion resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

TEXALAN® 298A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

TEXALAN® 290A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance

TEXALAN® 295A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

TEXALAN® 285A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits High utilization rate, high strength and excellent processing performance

TEXALAN® 271D This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits, High utilization rate, high strength and excellent processing performance.

Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).

MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

Texalan® 385A This product has excellent wear resistance, oil/solvent resistance, low temperature flex resistance, high pressure resistance, Flexibility.

Polyurethane (PUR). Unfilled. Very good noise reduction. Good impact resistance even at low temperature.

CarbonResin™ RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Texalan® 380A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

Texalan® 360A product has excellent processing properties, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

TEXALAN® 282A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

MB2001 is a general purpose light weight urethane board engineered specifically to meet the tooling requirements of a wide range of applications for the automotive/aerospace, prototype, foundry, and architectural industries. MB2001 is an easy to machine, simulated wood-like product (free or grain) that is dimensionally stable and exhibits unsurpassedwoodworking properties. Some of its outstanding performance features are listed below

Texalan® 382A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

TEXALAN® 264D This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits, High utilization rate, high strength and excellent processing performance.

CarbonResin™ RPU 70 is a tough, heat resistant material that is a good choice for parts requiring strength, toughness, and moderate heat resistance. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS. RPU 70 has a UL 94 HB flame resistance classification.

BCC Products now offers a truly metal-like machineable modeling plank for today's demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties.