Products in EIFS & Insulation: High Strength

JACKOCELL 6 R 312 is a product that has a High strength with Fast molding cycles. The Shape is normal molding and block molding.

LUMAsite® White 1040-POS is Opaque white and pebbled one side product.

LUMAsite® White 2020 is display white and translucent product.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2050 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

LUMAsite® Jade-SOS is pale green and has "Shoji” effect.

Thermo-Cor™ FR 5.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

LUMAsite® Ivory 02146-SOS is Creamy white and translucent in nature.

Jackocell 4 S 332 is a product that has a High strength, Fast molding cycles and Good density control as a feature with High density molding.

Versitex® VR3 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

LUMAsite® Parchment-SOS has Gentle “Shoji” effect and high transparent white.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2100 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Thermo-Cor™ FR 10.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Versitex® VR2 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

LUMAsite® Crystal II-SOS is a lightly frosted product.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1220 x 2440 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

LUMAsite® Crystal II is Near-clear product.

Jackocell 4 S 232 is a product that has a High strength, Fast molding cycles and Good density control as a feature with High density molding.

Jackocell 5 S 3312 is a product that has a High strength, Fast molding cycles and Low pentane and low density as a feature with Normal density molding.

Thermo-Cor™ FR 20.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

LUMAsite® Frost-SOS Type FR* has “Silken cobweb” effect and high transparent and fire retardant.

LUMAsite® Black 02025 is black and opaque.

Versitex® VR1 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

Thermo-Cor™ FR 2.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Thermo-Cor™ FR 15.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1000 x 2000has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

EFP, LLC. Arcel combines polystyrene and polyethylene into a strong, flexible foam that can be fabricated or molded into complex shapes. It is tough, durable, and flexible. Arcel combines the strength of EPS with the flexibility of PE. Arcel can minimize transportation and total packaging costs and damage rates.

LUMAsite® Brown 239-SO is Dark brown and opaque.

Thermo-Cor™ FR 7.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

LUMAsite® Sky-SOS has a pale blue “Shoji” effect.

JACKOCELL 6 R 211 is a product that has a High strength with Fast expansion rate.

Jackocell 5 S 2314 is a product that has a High strength, Fast molding cycles and Low pentane and low density as a feature with High density molding.

JACKOCELL 6 R 311 is a product that has a High strength with Fast expansion rate. The Shape is normal molding and block molding.