Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Building & Construction
Building Materials
Siding & Trim
Products in Siding & Trim
658 Products found in Siding & Trim
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Polynt Group
DISTITRON® 152
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks
DISTITRON® 152 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce production of gelcoat through mix with fillers and/or additives.
Polynt Group
NORSODYNE® O-100
Polymer Name:
Polyester (unspecified)
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
End Uses:
Structural Components
Norsodyne® O-100 - isophthalic resin for iso onyx marble, good transparent. Main applications areas are home and domestic applications etc.
Polynt Group
POLYCOR® TOP COAT BR WHITE 9199
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® TOP COAT BR WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
Polynt Group
Polynt Group 737-8298
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Vacuum Infusion Processing (VIP)
End Uses:
Pipes, Tanks
Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.
Dynamic Modifiers
Dynamic Modifiers 200-10228 Flame Retardant
Compatible Polymers & Resins:
Polylactic Acid (PLA)
Functions:
Flame Retardant
End Uses:
Housings, Cables, Appliances, Industrial Applications, Automotive Applications, Wires, Automotive Interior Parts, Siding Applications
Dynamic Modifiers 200-10228 Flame Retardant is new environmentally sustainable, nontoxic and proprietary flame-retardant concentrate is designed foruse in Natureworks polylactic acid fibers, tapes, monofilaments, films and thick gage extruded or moldedparts. This flame retardant is halogen free, does not contain antimony or any heavy metals. The flameretardant system in this concentrate is not known to impart color or odor or have a significant impact on themechanical properties when used at recommended levels to flame retard Ingeo PLA.
Polynt Group
ARMORFLEX® 953 SP
Chemical Family:
Glycols, Polyesters, Diols, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Armorflex® 953 SP is flexible NPG with added crack resistance and excellent UV properties. Good resistance to water and osmotic blistering. Low back side tack and easy to spray. Main applications areas are building and construction, home and domestic applications etc.
Polynt Group
POLYCOR® ISO PA WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
Polynt Group
NORSODYNE® PT-104
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics, Polyesters
Processing Methods:
Pultrusion
End Uses:
Tanks, Structural Components, Pipes
Norsodyne® PT-104 - isophthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.
Polynt Group
NORSODYNE® F 16207 AEL
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Processing Methods:
Filament Winding, Resin Transfer Molding (RTM)
End Uses:
Tanks, Structural Components, Pipes
NORSODYNE® F 16207 AEL - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in filament winding,injection molding,rtm method.
Pan Technology Inc.
PanTINT® 87Q1901
Color:
Orange
Pigment Type:
Organic Pigments
Chemical Family:
Azo Compounds
End Uses:
Solventborne Coating
Compatible Polymers & Resins:
Nitrocellulose, Alkyds, Polyureas, Polyesters, Polyurethanes (PU), Styrene Copolymers
Carrier:
Resin-based, Alkyd Resin
Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability
Polynt Group
NORSODYNE® 21033
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Processing Methods:
Hand Lay-up, Spray Lay-up
End Uses:
Tanks, Structural Components, Pipes
Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.
Brett Martin ltd
Foamalux Color
Foam Type:
Closed Cell Foam
Density:
499.424 - 499.424 kg/m³
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Signage, Decorative Surfaces
Physical Form:
Foam
Foamalux Color is the best colored foam PVC sheet on the market because of the depth and intensity of color combined with the ultimate silky smooth matt surface finish. Available in a choice of colors as standard, Foamalux Color provides the ultimate palette available for sign, print and display for the creation of unique prints and designs.
Polynt Group
NORSODYNE® H 73233
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks, Structural Components
NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.
Polynt Group
ENYDYNE® I 65133 A
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Resin Transfer Molding (RTM)
End Uses:
Pipes, Tanks
ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.
Polynt Group
POLYCOR® ISO BR
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
White
Features:
Good UV Protection, Chemical Resistant, Chemical Resistance, UV Protection, Flame Retardant
POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…
APCM
APCM DA 4090
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.
Polynt Group
STYPOL® RLPH1410
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Vacuum Infusion Processing (VIP)
End Uses:
Pipes, Tanks
Stypol® RLPH1410 - low color orthophthalic DCPD blend RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.
Polynt Group
Polynt Group VUP-2500105WH-22R
Functions:
Molding Compound
Polynt Group VUP-2500105WH-22R is used in composites applications.
APCM
APCM DA 4082
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.
Polynt Group
POLYCOR® 947 NEUTRAL BASE
Functions:
Surface Finish
Color:
Off White, White
Polycor® 947 Neutral Base have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, 947 series gel coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Polynt’s 947 series gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.
Sakai Chemical Industry
STABIACE HT-7
Functions:
Heat Stabilizer
Chemical Family:
Hydroxides
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
STABIACE HT-7 is Heat stabilizer for PVC and other halogen-containing polymers.
Aliancys
Synolite™ 0152-N-2
Polymer Name:
Polyester (unspecified)
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Polynt Group
Polynt Group 255X
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Color:
Off White, White
Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.
Polynt Group
Polynt Group HUP 16/25 RN-Decor
Functions:
Molding Compound
Polynt Group HUP 16/25 RN-Decor is generally used in building and construction, cosmetics, foundries, peroxides applications.
Polynt Group
POLYDYNE® 6084
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics, Polyesters
Processing Methods:
Hand Lay-up, Spray Lay-up
End Uses:
Tanks, Pipes
Polydyne® 6084 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.
Polynt Group
NORSODYNE® Y 93172
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks, Structural Components
NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.
IKA (UK)
IKAMOD 135A
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Functions:
Impact Modifier
End Uses:
Siding Applications, Pipes, Cup Holders
IKAMOD 135A is a synthetic material, kind of thermoplastic elastomer, made from high density polyethylene (HDPE) and chlorine. This chlorinated polyethylene (CPE) material is designed as an additive to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. It has very good mechanical properties (elongation at break, tensile strength) and very good toughness.
Polynt Group
STYPOL® RSCA1500
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Vacuum Infusion Processing (VIP)
End Uses:
Pipes, Tanks
Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.
Polynt Group
STYPOL® RSP10022
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Vacuum Infusion Processing (VIP)
End Uses:
Pipes, Tanks
Stypol® RSP10022 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.
Polynt Group
Polynt Group 747-5025
Polymer Name:
Polyester (unspecified)
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Vacuum Infusion Processing (VIP)
End Uses:
Pipes, Tanks
Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.
Uniplas
LCA® ABS 1250 Natural
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:
Injection Molding
Melt Flow Index:
5.0 - 5.0 g/10 min
ABS 1250 Natural is a injection grade ABS used for general purpose and medium impact
Pan Technology Inc.
PanTINT® 87K1383
Color:
Black
Pigment Type:
Inorganic Pigments
End Uses:
Solventborne Coating
Compatible Polymers & Resins:
Nitrocellulose, Alkyds, Polyureas, Polyesters, Polyurethanes (PU), Styrene Copolymers
Carrier:
Resin-based, Alkyd Resin
Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability
Return Polymers
Return Polymers RP1110
Polymer Name:
Polyvinyl Chloride (PVC)
Processing Methods:
Extrusion
Labeling Claims:
Contains PIR Resin, Recycled
Return Polymers RP1110 is 100% recycled WHITE PVC pulverized into a 20 mesh powder and blended in large quantities to ensure consistency. Primarily used in fence, window, and siding applications with or without a capstock layer and processed by single and or twin screw extrusion. NEW - Pellets now available. Titanium dioxide level certification available.
Polynt Group
DISTITRON® 814 KV20
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
DISTITRON® 814 KV20 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics.
Pan Technology Inc.
PanTINT® 87R1600C
Color:
Red
Pigment Type:
Inorganic Pigments
Chemical Family:
Iron & Iron Compounds, Iron Oxides
End Uses:
Solventborne Coating
Compatible Polymers & Resins:
Nitrocellulose, Alkyds, Polyureas, Polyesters, Polyurethanes (PU), Styrene Copolymers
Carrier:
Resin-based, Alkyd Resin
Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability
Polynt Group
Polynt Group HUP 16/18 RN-Neutro
Functions:
Molding Compound
Polynt Group HUP 16/18 RN-Neutro is generally used in building and construction, food contact, home and domestic applications applications.
Show
36
of 658 results
Go to page
1
2
3
4
5
6
7
8
9
10