Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
dielectric loss factor at 1000 Hz IEC 250 | 0,02 | — | tan s |
Shrinkage | 0,10 | % | ISO 2577 |
Specific Density | 1,75 | g/cm3 | ISO 1183 A |
surface weight ISO 10352 | 3.3 | g/m2 | — |
fibre Content ISO 1172 | 25 | % | — |
fibre length DF PA3.01 | 25/50 | mm | — |
Curing Time ISO 12114/1 | 90 | sec | — |
flexural modulus ISO 14125 | 140 | N/mm2 | — |
flexural strength ISO 14125 | 9 | N/mm2 | — |
impact strength ISO 179 | 50 | KJ/m2 | — |
heat distortion temperature ISO 75-2° | 200 | °C | — |
dielectric strength IEC 243-1 | 20 | KV/mm | — |
Specific volume resistance IEC 93 | 1014 | Ohm x cm | — |
tracking resistance IEC 112 | CTI 600 | level | — |
dielectric constant at 1000 Hz IEC 250 | 4,5 | — | — |
Water absorption ISO 62 | max. 0,30 | % | — |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time 30 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 160 °C