Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
Shrinkage | 0,10 | % | ISO 2577 |
Water absorption | 0,30 | % | ISO 62 |
surface weight | 4.5 | g/m2 | ISO 10352 |
Flexural modulus | 8.5 | N/mm2 | ISO 14125 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
fibre length | 25 | mm | DF PA3.01 |
Curing Time | 90 | sec | ISO 12114/1 |
tracking resistance | CTI 600 | level | IEC 112 |
fibre Content | 18 | % | ISO 1172 |
Flexural strength | 120 | N/mm2 | ISO 14125 |
Tensile strength | 45 | N/mm2 | ISO 527-4 |
impact strength | 45 | KJ/m2 | ISO 179 |
dielectric strength | 20 | KV/mm | IEC 243-1 |
spec. volume resistance | 1014 | Ohm x cm | IEC 93 |
Specific Density | 1,83 | g/cm3 | ISO 1183 A |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 30 sec
- /mm
- Molding pressure > 80 – 120 bar
- Molding temperature 135 - 155 °C