Products in Other Flooring & Surface Applications

7146 PTFE-Glass Fabric is a Economy Grade PTFE-Glass Fabric is designed for large volume applications that require cost-efficiency and high performance. Applications include leaders for processing paper, plastics, metallic foils and cloth, separator sheets for processing uncured rubber and manufacturing of abrasive wheels.

Ktisepox Hydro PR can be applied on a variety of surfaces such as concrete industrial floors and cement mortar surfaces. This product is a 2-component, water-based epoxy primer system that has strong adhesive properties. The product is eco-friendly and contains no VOCs.

Ficel® HC AZ 40 is used as Flexible PVC, Rigid PVC, Polyolefin.

51 Premium Floor and Wall is a premium floor and wall thin-set mortar providing superior bond strength. Premium quality blend of Portland cement, mineral fillers and special additives provides sag resistance, ease of application, long open time and adjustability.

AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Oxy Vinyls 185F is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

Alveocel is an extruded, closed-cell, easily recyclable polyolefin foam produced in continuous sheets. Within our broad range of grades and types you will find the ideal properties.

Nattex 10L is a semi-finished product in natural fiber in the form of continuous technical flax fibers. It comes as roving direct in natural fibers with pure flax of 10g/m.

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

SD Korea SUSI-1650 is a control fine cell dispersion with excellent foam stabilization.

Camex Limited Titanium Dioxide (Rutile) is Applicable to plastics such as masterbatches, color for PVC flooring, PVC pipe, moldings; used in the paint and textile industries.

M&CT 8008 is a material that is a blend of glasses from different industries, including recycled glasses, in a nearly white powder form.

Staple Fiber CD 25 35000 is a staple fiber, high tex yarns have a higher surface area that is ideal as a filtration medium for gas, dust and aerosols. Vetrotex manufactures a wide range of staple fibers ranging from 7 µm to 25 µm, perfect for use as filtration medium for mist elimination process.

Emulprene 1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

LIXOTHAN U 03 55 55 is a versatile urethane alkyd resin for floor paint, varnish and building primer with superior drying, mechanical and chemical resistance.

OM 13SF is a Sandable surfacing film and autoclave curable, sandable, Class A giving surfacing film.

Boud Minerals Calcined Flint Minigrain is an acid insoluble filler / aggregate obtained by calcining gray flints.

Razeen® LR 1150 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1150 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1150 is meets the relevant requirements of the FDA listing.

Alveolit is a physically crosslinked, closed-cell polyolefin foam produced in continuous sheets in a three-stage process: extrusion, crosslinking, and vertical foaming. Our wide range of grades and types includes foams with ideal properties for many individual requirements. In addition to its broad range of applications, Alveolit excels with its many advantages in thin-foam applications and its easy converting due to smooth-surfaced foam skin on both sides.

1600 Ultra Performance Grout is a premium polymer modified, presealed color-consistent grout. Its unique fast-setting formulation ensures color uniformity without efflorescence, is suitable for grouting both Wall and Floor tiles, and develops superior flexural and compressive strengths exceeding ANSI A118.7 requirements. Pre-sealed for reduced permeability, increased stain resistance as well as resistance to mold and mildew. 1600 UPG is formulated to be VOC-free.

KRAIBURG CSM is a chlorosulfonated polyethylene used applications such as cable sheathings, linings, seals, membranes, floor coverings, roofing felts, rubber-coated fabrics.

ASTAMITE C3909 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Basalt Fiber & Composite Materials Technology Development BMC chopped strand mats BМС-450 used for production of composites of various shape.

Morgan Adhesives Tilefast Superior Set is an off white adhesive composed of cement, fine graded sands and other special additives. This adhesive has been modified to achieve a high bond strength and exhibit nonslump characteristics with non-porous tiles.

Chemester® Mortar is an epoxy novolac based vinyl ester resin mortar for chemical resistant brick and tile vessel construction.

Emulprene 1013ACR is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. This rubber is produced in free flowing crumb form which eliminates the need for milling, cutting, or grinding equipment. Between 7-12% of Calcium Carbonate is used as dusting agent.

Titebond® PROvantage™ Subfloor Construction Adhesive-5488 is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and prevents squeaky floors. It offers a strong initial tack and excellent bond strength. It is covered under the 25 Year Silver Subfloor Warranty against subfloor squeaks and pops.

PPI RD-594 is a layer of dry, heat-activated, heat curing adhesive suitable for overlap splicing of various materials including heavy gage woven fabrics (e.g. Jute for carpet manufacture, glass fabrics etc.). RD-594 is supplied on a siliconised paper interliner. Heat activation of the adhesive will form high shear strength bonds which can be improved upon curing of the adhesive. Recommended activation conditions range from 10-30 seconds at 180-230°C.

Natro-Cel 97-A is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.

Capitol Adhesives VA380 Premium Vinyl Composition Tile Adhesive dries clear so that chalk lines are visible for easy installation and alignment of tiles. VA380 Premium Vinyl Composition Tile Adhesive is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

PEROXAN HX is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 92%, Liquid.PEROXAN HX is used for the production of controlled rheology polypropylene (CR-PP).PEROXAN HX is used for the curing of unsaturated polyester resins.PEROXAN HX is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Zelfo Technology Zelfo HG is a Patented fiber engineering technologies developed by Zelfo Technology can transform 100% renewable or recycled cellulose fibers into self-binding Zelfo® materials.

Jordan Mineral Est JM1SFN is a natural superfine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.