Products in Repair & Rehabilitation

Basopor 293 powder has specific end uses in solid physical form within the building materials market. Its applications span across building and construction sectors, including infrastructure, roads, paving, repair, rehabilitation, and industrial additives.

SILRES® BS 280 CF is a solvent-free silicone concentrate based on silane or siloxane. Like SILRES® BS 280, it can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 CF serve as high-quality water repellents for impregnating mineral building materials, particularly silicate-free natural stones like limestone or gypsum. It also develops its water-repellent effect through a reaction with atmospheric humidity.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

SILRES® BS 1316 is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It is a mixture of isomeric octyltrimethoxysilanes, with isooctyltrimethoxysilane as the main component. SILRES® BS 1316 is specifically recommended as a water-repellent impregnating agent and primer for normal and reinforced concrete in various applications such as bridges, roads, and buildings.

SILRES® BS 280 is a solvent-free silicone concentrate based on silane or siloxane. It can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 are high-quality water repellents for impregnating mineral building materials, especially silicate-free natural stones like limestone or gypsum. The water-repellent effect develops after application through a reaction with atmospheric humidity.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

ETONIS® 5150 P is a ready-to-use polymer dispersion specifically designed for special concrete applications. It is particularly well-suited for modifying concrete, especially in shotcrete applications for underground construction, tunneling, and mining. The primary applications of ETONIS® 5150 P include concrete protection and concrete repair.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

VINNAPAS® 7034 E is a dispersible polymer powder for dry mix mortars, specifically suited for renders, plasters, and concrete repair. It is based on a flexible terpolymer of vinyl acetate, ethylene, and vinyl ester. VINNAPAS® 7034 E belongs to the product class VINNAPAS® E, which means that it provides enhanced properties like improved workability, adhesion, or water resistance, to name just a few.

VINNAPAS® 5044 N (KOR) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (KOR) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5044 N (GER) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 7055 E is a dispersible polymer powder for dry mix mortars, specifically suited for waterproofing membranes as well as repair mortars. It is based on a very flexible terpolymer of vinyl acetate, ethylene, and vinyl ester. VINNAPAS® 7055 E belongs to the product class VINNAPAS® E, which means that it provides enhanced properties like high tensile adhesion strength, particularly on all substrates, and very good crack-bridging properties even at low temperatures.

VINNAPAS® 7031 H is a hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders, plasters, wall fillers, and joint fillers. It is based on a flexible terpolymer of vinyl acetate, ethylene, and vinyl ester. VINNAPAS® 7031 H belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of workability and adhesion.

ETONIS® 7850 A is a versatile dispersible polymer powder designed for various concrete applications, including shotcrete, concrete repair, cement admixtures, renders, and plasters. It is formulated with a soft copolymer of vinyl acetate and ethylene, categorized under the ETONIS® A product class. This polymer powder has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, providing a high level of formulation freedom. ETONIS® 7850 A is a standard product in our range, offering the best-in-class solution for a wide range of applications.

VINNAPAS® 825 ED is an all-round construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious self-leveling compounds. It is based on a semi-flexible terpolymer of vinyl acetate, ethylene, and vinyl chloride and belongs to the product class VINNAPAS® ED, enhancing the adhesion and mechanical strength of mortars.

ETONIS® 7550 A is a versatile dispersible polymer powder designed for various concrete applications, including pervious concrete, concrete repair, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, categorized under the ETONIS® A product class. This polymer powder has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 7550 A is a standard product in our range, providing a superior solution for a wide range of applications.

ETONIS® 5500 P is a versatile dispersible polymer powder designed for concrete and mortar applications, especially suitable for concrete repair mortars, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, belonging to the ETONIS® P product class. This polymer powder has a neutral effect on rheology and provides essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 5500 P is a standard offering in our product range, providing a top-quality solution for a wide range of applications.

VINNAPAS® 5028 E (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (USA) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 5044 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5844 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortar. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5844 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

ETONIS® 3500 W (GER) is suitable for modifying concrete, specialty mortar, and cementitious coatings for infrastructure products, especially for shotcrete applications in underground construction, tunneling, and mining. It is a polymer powder with a low glass transition temperature (Tg) and remains flexible at temperatures below freezing. It is also suitable for end products with low emissions.

CHT Group JPA-15 Powdered Antifoam is a silicone-based antifoam dispersed on a powdered medium that dissolves instantly with water, making it mildly hygroscopic. This product is used as a dry flowable, wettable powder and tank add defoamers for agriculture and patch and repair formulations and cement admixtures for dry construction mixes.

VINNAPAS® 5044 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortars. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

Deuterol Emulgator BI is a synthesized product derived from multifunctional organic bases combined with fatty acids, predominantly C18, ranging from C14 to C20, and incorporating amines. This emulgator facilitates the creation of colloidal blends between road bitumen and water. Soluble in organic solvents like alcohols or esters, it remains insoluble in water.

Poraver® 0.1 - 0.4 mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Cardolite® NX - 5454 is a low viscosity, solvent and benzyl alcohol-free phenalkamine curing agent designed for epoxy coatings. It offers rapid cure properties, excellent chemical resistance, adhesion on various surfaces, and outstanding water resistance and corrosion protection.

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

PYRAX® WA Pyrophyllite is a unique natural mixture of platy silicates, principally pyrophyllite, and quartz. PYRAX WA has a coarser particles size than PYRAX B. As a replacement for mica, PYRAX WA is an excellent filler in joint compounds and dry wall muds. PYRAX WA imparts mud crack resistance to high build coatings such as texture paints and block fillers. PYRAX WA is a good inert filler for use in contractor flat paints, where it contributes to improved low angle sheen control and scrub resistance. When used in exterior paints, the neutral pH of pyrophyllite yields reduced frosting.

PYRAX® B Pyrophyllite is a unique natural mixture of platy silicates, principally pyrophyllite, and quartz. As a replacement for mica, PYRAX B is an excellent filler in joint compounds and dry wall muds. PYRAX B imparts mud crack resistance to high build coatings such as texture paints and block fillers. PYRAX B is a good inert filler for use in contractor flat paints, where it contributes to improved low angle sheen control and scrub resistance. When used in exterior paints, the neutral pH of pyrophyllite yields reduced frosting.

Dispelair® P 437 is used as a foam control for the construction industry. It is effective in many applications at low concentrations.

Dispelair® P 430 is used as a foam control for the construction industry. It is effective in many applications at low concentrations.

Dispelair® P 893 is a highly effective foam control for the construction industry particularly where high compressive strength is required.

Prismagum-G Yellow A688 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Red S751 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information