Products in Other Building & Construction Applications

Jordan Mineral Est JM10N is a natural ultrafine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

Metalcrete Industries Superslump is a liquid admixture for concrete and mortar that allows water reduction without sacrificing slump or workability. Through a chemical process, it internally lubricates the cement matrix to increase the efficiency of any cementitious system. This allows the production of concrete and mortars with higher strengths, better freeze/thaw resistance, and lower permeability. It can also be used to increase the workability of concrete and mortar while maintaining water content.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Sehotech SH-424S is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in board.

Sunlube EBS DA-SF is in fine powder form and chemically known as Ethylene Bis Stearamide.

MAYRON® MW32020 GF U is Polycarbonate (PC) grade product.

Citric acid S40 is very fine pulverized powder with superior free-flowing abilities for easy handling. Thus, Citric acid S40 finds its uses in particular applications such as water sensitive dry blends like powdered detergents.

Johoku Chemical JPE-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

APChem CFL 205 is a synthetic, water-soluble, latex powder effective from 60 to 232°C to make cement more elastic (less shattering on perforating). Can be used with fresh water, seawater, calcium chloride water (up to 8%), and saturated saltwater.

RSH Polymere ABS 1008 B is good flowability, good impact strength and few spots on the surface. Plastics are extremely versatile materials. This also applies to our regranulates and compounds. By adding various fillers, additives, modifiers and stabilizers, we can influence the properties in a targeted manner and offer our customers highly professional materials. In addition to our standard range, we also develop tailor-made, individual regranulates and compounds for our customers on request.

FACI Calcium stearate DW is available with a vegetable base.

PEROXAN MI-60 KPX is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 120°C.

Boom Industry (SH) CA-105 TiO2 is Anatase titanium dioxide pigment which is produced by sulfuric acid proceed.It has good pigment properties,good whitenessand tint reducing power, easy dispersion etc.TiO2 CA-105 is widely for plastic, rubber, ink, paper, paint industry etc.

Armlen PP-2FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

Iron oxide red CI PR.101 145 is an important inorganic colorant, iron oxide red is characterized high opacity, strong tinting strength, easy dispersibility, excellent light fastness and perfect weather resistance. It is extensively used in concrete, roofing tile, paver, stucco, masonary, paint, coating. rubber, plastic, paper and leather industries etc.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Talc MP 70-22 is designed for use in a wide variety of applications which can benefit from talc’s platy particle shape, highly oleophilic surface and softness that do not require high dry brightness. Typical applications include sealants and caulks, joint compounds, spackles and texture coats, and other construction and agricultural products.

Shree Balajee Magnesite Ramming Mass provide ramming mass of high grade that complies with international quality standards and is therefore widely demanded in national as well as international market. The Ramming Mass that we offer is used as cement for the refractory bricks. We are capable of providing all type of Ramming Mass to the customers.

Triune Chemicals and Materials LE-828E is standard BPA type electronics grade which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Sunlube ST-10 is in fine powder form and chemically known as Tricalcium Phosphate.

CompaDur® 121 GF 10 FR (011) is a PBT, injection molding grade, 10% glass fibers, heat-stabilized, flame retardant, good flow ability and strength.

MAYREX® MW11120GF is Acrylonitrile-Butadiene-Styrene (ABS) grade product.

CompaDur® 121 GF 20 (004) is a PBT, injection molding grade, non-reinforced, high viscosity, easy release.

Onyx Concrete Coatings Polyaspartic 100-C is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. It provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT)and is uniquely suited for cold applications. For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100-C is simply unmatched. It is also formulated to be used wih virtually all other Onyx base systems.

Acti-Tech™ Compatibilizer 09MA18 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process. Acti-Tech compatibilizer 09MA18 has the highest maleic anhydride content among the Acti-Tech compatibilizers range. It is designed to provide a very high coupling efficiency to enhance performance of a wide variety of polymer compounds requiring high functionality and is particularly recommended for the following applications such as compatibilizer for PA/PP or PET/PP compounds, performance booster for recycled feeds, adhesion promoter for special applications.

SCIGRIP® SG7706 B is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

ADK STAB 135A also called DPDP is applied in ABS, PVC, engineering plastics and contains features such as color improvement and high heat stability.

CHS-EPOXY 501 is a Bisphenol A/F resin modified by monofunctional reactive diluent.

LFT-G® PBT-NA-LGF30 is a Polybutylene Terephthalate (PBT) with Long glass fiber type with 30% fiber Content in Natural color, and and custom colors.

BONTAMIDE 2050 is a resin which has long pot life, excellent toughness

Armlen PP MF 35-1 is a 35% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

High performance grease SF04 is a special lubricating grease based on mineral oil + PAO / polyurea. It has a wide service temperature range and is suitable for plain and rolling bearings up to a service temperature of 160°C. High performance grease SF04 ensures excellent wear protection, and its EP additives provide a high pressure absorption capacity. It is very adhesive and resistant to water under static and dynamic loads. It is particularly resistant to oxidation and aging, and reliably protects against corrosion.

LAPOX® AH-351 is modified aliphatic amine adduct having high functionality, capable to cure epoxy resin at ambient temperature. It provides faster reactivity and short pot life when reacted with epoxy resins. When cured with stoichiometric ratio with modified epoxy phenol novolac, it provides high thermal and mechanical properties coupled with high chemical resistance. It is suitable to formulate solvent free and high solid coatings for high chemical resistance coatings and floorings.

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.