Other Building & Construction Applications

The Mitsubishi Chemical Group

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Sasol

Sasol BHT

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

The Mitsubishi Chemical Group

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Maintains high electrical reliability  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Peter Greven Nederland C.V.

LIGALUB 55 PE

The Mitsubishi Chemical Group

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Emery Oleochemicals

EDENOL® D 81

EDENOL® D 81 is a Epoxidized soybean oil product. EDENOL® specialty plasticizers improve the processability and performance of plastics. They impart flexibility and durability to the finished article. We offer a wide range of plasticizers for high performance and technical applications, including both polymeric and monomeric plasticizers.

Oltchim

PETOL® 28-2Lm

PETOL 28-2LM is a PPG, with a molecular weight of 4000, with low unsaturation, synthesized with double metal cyano complex catalyst. The product is acidified slightly with phosphoric acid.

Polyscope

XIBOND 160

XIBOND® 160 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 160 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 315 °C and high shear stresses should be avoided.

Sasol

Sasol Monoisopropanolamine

Monoisopropanolamine (MIPA) with a purity of 99% is an Monoisopryl Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Peter Greven Nederland C.V.

LIGASTAR CA 600

Peter Greven Nederland C.V.

LIGASTAR CA 800

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V150

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Tramaco

TRACEL® DB 140

TRACEL® DB 140 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Peter Greven Nederland C.V.

LIGALUB 11 GE

Polyscope

XIBOND 120

XIBOND® 120 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 120 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 340 °C and high shear stresses should be avoided.

Pergan

PEROXAN AZDN

PEROXAN AZDN is 2,2'-Azodiisobutyronitrile 98%, Powder.PEROXAN AZDN is used for the (co)polymerization of styrene, vinylchloride, vinylidenechloride, acrylonitrile, acrylates and methacrylates.

Berolan Vertriebsges

Berolan LP 70

Berolan LP 70 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on cement, gypsum or lime. It leads to a better plaster yield, to improved workability and improves the wetting of the mortar. Related to the longer open timea tearing of the plaster surface and skin formation will be reduced. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized. CE-Nr.: 1139-CPD-0802/09

IRRH Speciality Chemicals

IRRH Speciality Chemicals Magnesium Stearate IR-302

IRRH Speciality Chemicals Magnesium Stearate IR-302 is biodegradable and non-toxic.

PCC Chemax

SyncoPol GT1050

SyncoPol GT1050 is a glycerine based polyether polyol with hydroxyl value in range 155-165 mgKOH/g and molecular weight ~1050 g/mol. The product has low viscosity in range 200-600 cPs at 25°C and functionality ~3.0. SyncoPol GT1050 is a multifunctional polyether polyol designed as an intermediate for the production of polyurethane Coating, Elastomers, Sealant Application and OCF foam.

Emery Oleochemicals

LOXIOL® G 60

LOXIOL® G 60 is a C16/18 phthalate product. LOXIOL® lubricants optimize the processing characteristics of PVC and improve the rheology of the polymer melt by reducing melt viscosity and friction during processing. We offer a wide range of bio-based internal and external lubricants for a variety of applications including calendering, extrusion, and injection molding.

Han Nanotech

POLYB® AM-07

POLYB® AM-07 is an additive added to attain a matte finish and/or to lower the gloss of a plastic part. Effective in lowering gloss of ABS, PC/ABS alloy, ASA and keep the physical properties of resin.

Polyscope

XIBOND 250

XIBOND® 250 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 250 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 290 °C and high shear stresses should be avoided.

Polyscope

XIBOND 370

XIBOND® 370 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random terpolymer of styrene, maleic anhydride and N-Phenylmaleimide. XIBOND® 370 is a random terpolymer of styrene, maleic anhydride and N-Phenylmaleimide. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 350 °C and high shear stresses should be avoided.

Pergan

PEROXAN ME-50 LX

PEROXAN ME-50 LX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LX is a general purpose MEKP used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

Pergan

PERGAPROP HX-20 PP

PERGAPROP HX-20 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 20%, Granules with Polypropylen.PERGAPROP HX-20 PP is used for the production of controlled rheology polypropylene (CR-PP).

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA)

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Pergan

PERGAQUICK A3 S

PERGAQUICK A3 S is N,N-Diethylaniline 10%, Solution in styrene.PERGAQUICK A3 S is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

The Mitsubishi Chemical Group

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Emery Oleochemicals

LOXIOL® G 71 S

LOXIOL® G 71 S is a Complex ester product.LOXIOL® release agents are used for calendering and injection molding of rigid and flexible PVC. They are also used for paste processing, and they can improve the extrusion behavior, since release agents also work as external lubricants. However, external lubricants do not necessarily work as release agents. LOXIOL® release agents migrate to the interface of polymer and processing machine, depending on the particular level of compatibility with the polymer matrix. Often LOXIOL® release agents for PVC are based on complex esters, which are lubricants with a polymeric structure and a high molecular weight.

Emery Oleochemicals

LOXIOL® 895

LOXIOL® 895 is a Ethylene glycol distearate product. LOXIOL® lubricants optimize the processing characteristics of PVC and improve the rheology of the polymer melt by reducing melt viscosity and friction during processing. We offer a wide range of bio-based internal and external lubricants for a variety of applications including calendering, extrusion, and injection molding.

Emery Oleochemicals

EDENOL® 111

EDENOL® 111 is a Butyl carbitol adipate product. EDENOL® specialty plasticizers improve the processability and performance of plastics. They impart flexibility and durability to the finished article. We offer a wide range of plasticizers for high-performance and technical applications, including both polymeric plasticizers and monomeric plasticizers.

Fine-Blend

Bio-Master™ SG-20

Bio-Master™ SG-20 is a kind of epoxy-type random copolymer and its appearance is white transparent powder.

Polyscope

XIBOND 260

XIBOND® 260 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 260 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 280 °C and high shear stresses should be avoided.

Polyscope

XIBOND 125

XIBOND® 125 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random copolymer of styrene and maleic anhydride. XIBOND® 125 is a random copolymer of styrene and maleic anhydride. It can be processed in all types of regular polymer processing equipment. For good dispersion in styrenic polymer like ABS, twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended. To avoid product degradation, temperatures above 340 °C and high shear stresses should be avoided.