Products in Disposable Nonwovens: Polypropylene Homopolymer (HPP)

Braskem CP250H polypropylene homopolymer (HPP) offers narrow MWD and low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

Moplen HP562T is a Polypropylene homopolymer resin for spunbond fiber

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

Moplen HP461X is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

Moplen HP461Y is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

Moplen HP563T is a Fast crystallization polypropylene for spunbond

RG 1191 N is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

RG 1101 SC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, Disposable Napkins, Diaper, GeoTextiles, Filter Application

TATREN HT 25 11 is a controlled rheology homopolymer of very narrow molecular weight distribution. Consistent processability, good color and thermal stability, very low volatiles and low smoke make this grade suitable to be used for very demanding fiber applications. This grade contains anti gas fading additive package.

Moplen HP561R is a Polypropylene homopolymer resin for spunbond fibers

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

RG 1101 XS is a Polypropylene Homopolymer With antiGasfading Stabilization and Inherent UV Stability. It is used in POY/DTY, CF, Laminating

RG 1101 RC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, BCF/CF, POY Yarns, Injection Molding of Articles

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Moplen HP563S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen HP563S is a homopolymer typically used in spunbonded nonwovens. Moplen HP563S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Moplen HP561X is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

RG 1101 XR is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

RG 1191 XN is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)