Products in Medical Devices & Assemblies: Handles

Pentamid A MK30 H black is a normal viscosity, heat stabilized polyamide 66, 30% mineral filled.

Pentamid AB GK30 H black is a normal viscosity, heat stabilized polyamide 66+6, 30% glass bead reinforced, good surfaces.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Nylene 43% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6. Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Acetal-C ESD90, dissipative is a high-quality engineering plastic material. It is used to prevent uncontrolled static discharge in sensitive electronic environments or in explosive atmospheres.

Pentamid B S GV10 GK20 H black is a low viscosity, heat stabilized polyamide 6, 10% glass fiber and 20% glass bead reinforced.

Pentamid A GK30 H LS black is a normal viscosity, heat stabilized polyamide 66, 30% glass bead reinforced, laser markable.

Pentamid A GV15 E H RC black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, impcat modified, recompound.

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Nylene 33% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

PENTAC Polymer GmbH Pentamid™ B GV10 MC20 H2 LS black is a normal viscosity, high heat stabilized polyamide 6, 10% glass fiber and 20% mineral reinforced, laser markable.

Pentamid B GV15 MK25 H RC black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 25% mineral reinforced, recompound.

Nylene 15% glass fiber reinforced, impact modified, heat stabilized nylon 6 Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

Pentamid A GV20 GK10 H natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber and bead reinforced, special coloration.

PA66 GF/MF reinforced

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

86 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

Pentamid B MK40 H black is a normal viscosity, heat stabilized polyamide 6, 40% mineral filled.

Sylvin™ 9993-65 Red 6210 is a vinyl compound for injection molding handle applications.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

70 Shore A, UV Stabilized TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

Pentamid B GV30 E H black is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced, impact modified.

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

According to a study, about 80% of infection diseases start from surface contact. Bacteria and fungi are everywhere in our daily life, the microbe can quickly reproduce with suitable conditions. It may cause contamination, odors and infectious diseases. Anti-Microbial, Anti-Fungal additives will be integrated into the polymer during the manufacturing process to inhibit the growth and provide protection from microbes.

Pentamid B GV15 GK15 H black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 15% glass bead reinforced.

Pentamid AB MC30 H black is a normal viscosity, heat stabilized polyamide 66+6, 30% mineral filled, very good surfaces.

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle