Products in Other Medical Applications: Industrial Applications

Elastocon® STK40B is a black thermoplastic elastomer that has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40B is well suited for consumer goods and industrial applications requiring non-slip/soft dry-touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK40B can be overmolded to PC, ABS, PC/ABS, Acrylic, PS, copolyester, various grades of polyamide, and more.Elastocon® STK40B is supplied as ready to use pellets in 50 lb. bag quantities.

Envir® PA66G33HL-BK0101 is a 33% Glass fiber reinforced Nylon 66 molding resin, it is Heat stabilized and hydrolysis resistant. 66G33HL is optimized for properties and processibility. It is provided Black in color.

PPS based, thermally conducting, electrically insulating grade with improved processability.

Elastocon® 8078B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078B can be overmolded to polypropylene.Elastocon® 8078B is supplied as ready to use pellets in 1000 lb. quantities.

Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.

Elastocon® 8028N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8028N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8028N can be overmolded to polypropylene.Elastocon® 8028N is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

Elastocon® 8058HL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058HL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058HL can be overmolded to polypropylene.Elastocon® 8058HL is supplied as ready to use pellets in 1000 lb. quantities.

PPS based, thermally conducting, electrically insulating grade with improved processability.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

EnPom™ 902ULV by EnCom Polymers is comprised of Polyacetal Homopolymer. It is commonly used EnPom™ 902ULV is certified as UL Flame Rated.

Thermally conductive Polycarbonate

Glass reinforced (20 %) Polyether Sulfone. Excellent chemical and electrical resistance, high stiffness, modulus and HDT.

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Thermally conductive Nylon 6,6.

Elastocon® 8078NL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a scratch and mar resistant surface finish. Elastocon® 8078NL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078NL can be overmolded to polypropylene.Elastocon® 8078NL is supplied as ready to use pellets in 1000 lb. quantities.

EnPom™ F3054 by EnCom Polymers is comprised of Polyacetal Homopolymer. It is commonly used EnPom™ F3054 is certified as UL Flame Rated.

Elastocon® 2810 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2810 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2810 can be overmolded onto polypropylene.Elastocon® 2810 is supplied as ready to use pellets in 40 lb. bag quantities.

Envir® PA6G30L-BK0704 is a 30% Glass fiber reinforced Nylon 6 molding resin. 6G30L is an excellent utility grade compound that is optimized for properties, process and economics. It is provided Black in color.

Envir® PA66T2HL-BK0603 is a highly Toughened Nylon 66 molding resin, it is Heat stabilized and Lubricated for high performance and processing. 66T2HL offers a versatile balance of strength and toughness, it is provided Black in color.

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.

Next PC CX-02NC is PC UnFilled Natural Compound.

Elastocon® 8058BL is a black lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058BL is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058BL can be overmolded to polypropylene.Elastocon® 8058BL is supplied as ready to use pellets in 50 lb. bag and 1000 lb. quantities.

Elastocon® CLR65 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, high strength properties and a tactile surface finish. Elastocon® CLR65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR65 can be overmolded onto polypropylene.Elastocon® CLR65 is supplied as ready to use pellets in 1000 lb. quantities.

Elastocon® 8088BL is a black lubricated thermoplastic elastomer formulated for applications that require high impact resistance and a reduced coefficient of friction. Elastocon® 8088BL is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8088BL can be overmolded to polypropylene.Elastocon® 8088BL is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene.Elastocon® CLR40 is supplied as ready to use pellets in 40 lb. bag quantities.

Elastocon® 2825 thermoplastic elastomer compound has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2825 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2825 can be overmolded onto polypropylene.Elastocon® 2825 is supplied as ready to use pellets in 40 lb. bag quantities.

Elastocon® 8038N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8038N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8038N can be overmolded to polypropylene.Elastocon® 8038N is supplied as ready to use pellets in 50 lb. bag quantities.

V75W is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption.Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V75W has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.V75W also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1.Key Attributes Low compression set provides long-term sealing performance. Excellent resistance to oils, fuels and hydraulic fluids. FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Sanitary Standards 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI-free) Typical Applications Pharmaceutical and bio-analytical equipment Food processing equipment Industrial applications (eg. paint spray and printing)

Elastocon® 8088N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8088N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8088N can be overmolded to polypropylene.Elastocon® 8088N is supplied as ready to use pellets in 50 lb. bags and 1000 lb. box quantities.

Elastocon® STK60B black thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60B is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60B can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60B is supplied as ready to use pellets in 50 lb. bag quantities.

Glass reinforced (30 %) Polyether Sulfone, excellent chemical and electrical resistance, high stiffness, modulus and HDT.

Polycarbonate Alloy - High temperature (HDT), high Impact, with excellent short and long term heat stability.

Polycarbonate/Acrylonitrile Butadiene Styrene, thermally and electrically conducting grade.