Products in Surgical Instruments & Trays: Medical Devices

Silopren™ LSR 2680 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used It is available in Liquid form.

The Addisil™ 140 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Elastocon® 8068BL is a black lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8068BL is well suited for consumer goods and industrial applications requiring increased U.V. stability. Elastocon® 8068BL can be overmolded to polypropylene.Elastocon® 8068BL is supplied as ready to use pellets in 1000 lb. quantities.

Polyplastics Group Topas® 6013M-07Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant Topas® 6013M-07Topas® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Copolymer Good Esthetics

fluteck™ K301 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK)

fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Elastocon® 2850PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2850PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2850PE can be overmolded and coextruded with polyethylene.Elastocon® 2850PE is supplied as ready to use pellets in 50 lb. quantities.

Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.

Elastocon® OF65 is a natural thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a reduced coefficient of friction. Elastocon® OF65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® OF65 can be overmolded onto polypropylene.Elastocon® OF65 is supplied as ready to use pellets in 50 lb. bag quantities.

VersaMer™ PHA belongs to the MCL-PHA family and share the same general PHAs structure, with all repeating units containing 6 or more carbons.

AFT Fluorotec AF115 Reinforced PTFE material specifically developed for slide bearing and skidway applications. This material comprises a unique blend of filler compounds to give optimum compressive strength whilst retaining very low frictional coefficients. The load bearing characteristics are greatly improved over conventional PTFE materials and the unique blend of fillers means maximum compressive strength whilst still having an extremely low coefficient of friction, regardless of conditions, surpassing other filled PTFE materials. AF115 is also unaffected by UV.

Elastocon® 8078N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078N can be overmolded to polypropylene.Elastocon® 8078N is supplied as ready to use pellets in 1000 lb. quantities.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).

The Addisil™ 470 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Silopren™ LSR 2080 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2080 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2080 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Vibration dampers Catheters Parts of medical technical equipment ... and many more.

Elastocon® STK56PA-B black thermoplastic elastomer has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA-B is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA-B can be overmolded to nylon.Elastocon® STK56PA-B is supplied as ready to use pellets in 1000 lb. quantities.

Addisil™ 150 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Elastocon® 8068B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068B is well suited for consumer goods and industrial applications requiring increased U.V. stability. Elastocon® 8068B can be overmolded to polypropylene.Elastocon® 8068B is supplied as ready to use pellets in 50 lb. bags and 1000 lb. box quantities.

The Addisil™ 60 Xray is a one-component heat curable rubber for making elastomers (HCE) with a hardness of 60 Shore A for medical applications. This compound is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Silopren™ LSR 4600 FC liquid silicone rubber is a family of platinum catalyzed fast cure two-component liquid silicone rubber offered in a variety of different durometers. With faster cure at lower temperatures such as 100°C, it is an excellent candidate to consider for injection molding onto lower temperature substrates such as polycarbonate.Key Features and Benefits fast cure at low temperatures long pot life UV resistance ISO 10993/USP Class VI tested(a) low viscosity chemical resistance high tear strength Potential Applications respiratory/anesthesia masks wound drain bulbs surgical devices diagnostics imaging fluid and drug delivery thermoplastic overmolding.

Elastocon® 8068L is a colorable lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8068L is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068L can be overmolded to polypropylene.Elastocon® 8068L is supplied as ready to use pellets in 1000 lb. quantities.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Silopren™ LSR 4020 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4020 TP 3364 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4020 TP 3364 are distinguished by the following properties: excellent biocompatibility high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylene oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes. Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4020 TP 3364 is particularly suitable for the following elastomeric articles: sealing elements, catheters, vibration dampers, tube connectors, parts for medical technical equipment, mats.

Silopren™ LSR 2630 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2030, Silopren™ LSR 2630 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2630 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2630 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Pacifiers Baby teats Respiratory devices Switch covers Swimming caps Vibration dampers Air vent flaps Cable connectors Catheters Parts for medical technical equipment s.o.

fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Silopren™ LSR 4670 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4670 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4670 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability.

Silopren™ LSR 2640 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2040, Silopren™ LSR 2640 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2640 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2640 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Cable connectors Parts of medical technical equipment.

fluteck™ P1050 Modified PTFE Standard Grade is Modified PTFE for Ram Extrusion, Compression and Isostatic molding.

MARFRAN.MED® D HTRE has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

Silopren™ LSR 4640 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4640 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4640 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days.

Silopren™ LSR 4080 is a two-component liquid silicone rubber for injection molding processes. The LSR 4080 enables particularly the production of parts for healthcare devices such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanizates consisting of LSR 4080 are distinguished by the following properties: Good rubberlike properties Excellent biocompatibility Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability Easy pigmentable with LSR color pastes.

MARFRAN.MED® TR LV has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

fluteck™ C100 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene

Silopren™ LSR 4600 FC liquid silicone rubber is a family of platinum catalyzed fast cure two-component liquid silicone rubber offered in a variety of different durometers. With faster cure at lower temperatures such as 100°C, it is an excellent candidate to consider for injection molding onto lower temperature substrates such as polycarbonate.Key Features and Benefits fast cure at low temperatures long pot life UV resistance ISO 10993/USP Class VI tested(a) low viscosity chemical resistance high tear strength Potential Applications respiratory/anesthesia masks wound drain bulbs surgical devices diagnostics imaging fluid and drug delivery thermoplastic overmolding.