Products in Tubing & Fluids Handling

PermaFelx® 55 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

PEEK™ Tubing is a linear semi-crystalline aromatic polymer, is considered the highest performing thermoplastic material due to its ability to withstand extreme temperatures, high pressure, and caustic fluids. Now Zeus has taken PEEK to an entirely new level of performance with the introduction of PEEKshrink™ – PEEK heat-shrinkable tubing.

Fainplast Compounds Fainplast™ PVC MPH 83/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 83/T include hose/tubing and medical/healthcare.

Antitack BTO-7 is a pigment-free antitack agent for the treatment of unvulcanized rubber compounds based on different biodegradable detergents in combination with anti-foam and anti-corrosive additives. The product was developed especially for the treatment in batch-off equipment working in dipping or spraying system. The use of Antitack BTO-7 results in an extremely proper production site and in a very low wear and tear of the machinery.

Polyplastics Group Topas® 6013M-07Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant Topas® 6013M-07Topas® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Copolymer Good Esthetics

Silopren™ LSR 2650 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2050, Silopren™ LSR 2650 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2650 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2650 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Pressure cookers parts Spark plug boots Cable connectors Catheters, parts of medical technical equipment s.o.

Miracll Chemicals E 80 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Plastiverd Plastiverd Shape is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. The resin has been specially designed for injection processes.

Silopren™ LSR 2680 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used It is available in Liquid form.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Black 6679 is an economy recycled PE based masterbatch containing high opacity carbon black. This product is designed for injection molding items, extruded tubings and sheets for general purpose.

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Tygon B-44-4X-I.B. is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X-I.B. include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

The Addisil™ 482 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Nanjing Shuguang Chemical Group Antioxidant SG-R 405 is one kind of highly effective, odorless, nontoxic general rubber antioxidant, and has small pollution among the amine antioxidants. Applied to natural rubber and chloroprene, SBR, isoprene, NBR, and so on, it can effectively protect from aging caused by heat, light, ozone, flex-fatigue and cracking. It has a good synergetics with sulfur-containing antioxidant. In contrast to other general antioxidants, SG-R 405 has an inimitable advantage when used in plastic and electric wire and cable, food packing material, adhesives, especially in chloroprene rubber and food packing, medical and health care product as rubber parts, light or garish colored rubber products, in the advanced rubber electric cable as well as the polyether, in advanced lubricating oil. Therefore, it is the ideal substitute of the antioxidant A, antioxidant D,, RD, 264, 4010, SP, WH-02, and the recommended dosage amount is 0.5-2%.

Tygothane C-210-A is a Polyurethane (Polyester based) (PUR-Ester) product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Clarity Good Flexibility Good Tear Strength Wear Resistant

Fainplast Compounds Fainplast™ PVC MPH 45/K is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 45/K include hose/tubing and medical/healthcare.

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Polyimide /PI Glide™ Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides typically do not melt before decomposing; thus, they demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. Zeus polyimide tubing is also available in a layered or composite construction using a combination of PI and PI Glide™ to suit a variety of tubing requirements. Mechanical properties, lubricious surface, and many other tubing properties can be tailored in this way. Choosing Zeus PI and PI Glide™ tubing for your catheter construction needs allows users to consolidate their components with a single best-in-class supplier.

Fainplast Compounds Fainplast™ PVC MPH 73/GT 1 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 73/GT 1 include hose/tubing and medical/healthcare. The primary feature is sterilizable.

Sylvin™ 86045-60HMW Clear Yellow 4172 is a vinyl compound formulated for chemical resistant tubing. This compound contains 50% less barium and zinc.

Miracll Chemicals E 90 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Elastocon® 8058N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8058N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058N can be overmolded to polypropylene.Elastocon® 8058N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Oxy Vinyls 195F is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

Elastocon® STK40 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® STK40 is certified as FDA and RoHS Compliant. It is available in Pellets form.

Paracril OZOM58 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

PHOENIX™ 02851 is an excellent scratch resistance for bonding with polypropylene and RoHS compliant. It is conform to FDA and suitable for medical tube with tools grip syringe stopper.

Sylvin Technologies Sylvin™ 5132-75UV Clear Pink 6277 is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

Mercapto silane for sulfur cured rubber compounds which are containing silica, clays or metal hydroxides as filler. It is suitable for all elastomers and recommended to use if an improvement of technical results, such as tear strength, modulus, compression set or abrasion is required.

Fainplast Compounds Fainplast™ PVC MPH 62/H is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/H include engineering/industrial parts, hose/tubing and medical/healthcare.

Franplast Translucent USP Cl. VI is translucent SEPS based compound, perfect for medical applications. Without PVC and latex, biocompatible and without phthalates, it is a transparent and soft thermoplastic rubber, which represents an optimum alternative to silicone. It can be used for the realization of various soft touch components for medical use as injection ports, twist off closures, connectors, tubes for peristaltic pumps, joints, stoppers, gaskets, valves and membranes.

ReZilok Rx 101 tie-layer resin is a maleic anhydride grafted linear low density polyethylene. This tie-layer resin is used to bond dissimilar materials in coextrusion or reflow processes. ReZilok Rx 101 is optimized for adhesion to a variety of materials through chemical and physical bonding mechanisms.

Kezadol PCI is a surface treated calcium oxide powder for use as an effective desiccant. The calcium ox-ide is coated by a chemically indifferent hydrocarbon. Due to this preparation Kezadol PCI has a reduced air pollution. Additionally there will not be any unintended reaction with humidity.

Rubaloy RA - 70 is the most popular and widely used grade of fluxed NBR / PVC in the polymer ratio of 70-30. It is a non-staining, oil, Ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber with Poly Vinyl Chloride Resin.