Products in Tubing & Fluids Handling

BROMOBUTYL RUBBER is obtained by bromination of butyl rubber with unsaturation of minimum 1.5 mol%

Fainplast Compounds Fainplast™ PVC MPH 67 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 67 include medical/healthcare and hose/tubing.

Elastocon® 8078B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078B can be overmolded to polypropylene.Elastocon® 8078B is supplied as ready to use pellets in 1000 lb. quantities.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Silopren™ LSR 4060 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4060 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4060 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4060is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, bellows, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Polymer Industries integrates the antimicrobial protection into the product during the manufacturing process. Our antimicrobial material kills or inhibits the growth of microorganisms caused by bacteria, algae and fungi. Our products are also non-porous and kill the spread of bacteria resistant to moisture and mildew. The need to combat infectious diseases continues to increase in all commercial applications. Healthcare facilities and public venues are ideal locations for antimicrobial surfaces. In addition, antimicrobial surfaces are needed in food preparation areas, with food processing equipment and on industrial cutting surfaces. These products limit bacteria growth improving the hygiene of surfaces. Antibacterial products are created by incorporating an antibacterial agent (biocide) to suppress the growth of bacteria on the surfaces of products through a process called zone inhibition to control growth of bacteria, fungus and algae. Unlike surface antimicrobials, the advanced antimicrobial technology protects against bacterial degradation for the lifetime of the product. Antimicrobial products are treated with an antimicrobial agent to inhibit bacterial or fungal growth and are resistant to deterioration by mold, fungus or mildew. Studies have shown that surfaces with antimicrobial technology can inhibit the the amount of certain product-damaging bacteria by 99%. Disclaimer: Products prepared according to ASTM standards. This product does not protect users from diseases. Always clean surfaces thoroughly with household disinfectant.

Silopren™ LSR 4660 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odor and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days).

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

The Addisil™ 462 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Black 6678 is an economy black LDPE based masterbatch containing high opacity carbon black.This product is designed for general-purpose extruded tubings,sheets and film blowing.

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Fainplast Compounds Fainplast™ PVC MPH 69/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/T include hose/tubing and medical/healthcare.

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

PI Glide™ Custom Coating is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI Glide™, our PI / PTFE composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure PTFE. PI Glide™ maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI Glide™ is available in tubing and as a coating for over-the-wire (OTW, insulated wire) applications. For insulated wire, PI Glide™ provides a low-friction wire for easier deployment or insertion into tubing. With PI Glide™ tubing, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. PI Glide™ can also be produced in a layered composite construction with our conventional polyimide or with PI Glide™ alone. Composite layering polyimide and PI Glide™ allows users to further tailor polyimide tubing or coating properties.

Mediaplast PS-1 is a synthetic plasticizer based on polyalkylbenzene, which is mainly recommended for the use in elastomers with low to medium polarity, e. g. NR, IIR, BR, SBR, EP(D)M, but also CR, CM/CSM, EVA and PNR.

Silopren™ LSR 4030 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4030 are distinguished by the following properties: high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylen oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4030 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, diaphragms, bellows, catheters, baby teats, respiratory devices, vibration dampers, mats, parts for medical technical equipments.

Fainplast Compounds Fainplast™ PVC MPH 75/D is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 75/D include hose/tubing and medical/healthcare.

Toraycon® 1200MF by Toray is comprised of Polybutylene Terephthalate. It is commonly used

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

The Addisil™ 452 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Trelleborg Industries UK PEEK is a good choice for applications where fluid compatibility is a concern. It is virtually inert and has good mechanical properties, providing low friction and wear. High strength, toughness and biocompatibility make PEEK ideal for many medical device applications.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Miracll Chemicals E 180 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Fainplast Compounds Fainplast™ PVC MPH 78/OP is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 78/OP include medical/healthcare and hose/tubing.

Talcubex is a non-dusting talc which is treated with Kettlitz-Haftubex in such a manner that the fine dust-causing particles of talc are bound. It is still an almost free-flowing powder which provides an excellent coating on rubber compounds, batches and profiles.

Zeus Industrial Products Reinforced Polyimide Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. For applications that require enhanced torque, flexibility, strength, pushability, kink resistance, or burst resistance, reinforced polyimide tubing is available. Zeus reinforced polyimide tubing can be produced in full load and half load braid patterns, with various PPI (pick per inch) depending on your specifications. Lower braid densities (low PPI) result in increased pushability, while higher braid densities (high PPI) result in increased flexibility and steerability. Reinforced polyimide tubing is also available in coil configurations with various WPI (wraps per inch) to meet your requirements.

Kettlitz-Dispergator DS is a dispersing agent improving flow and extrusion properties of rubber compounds. The material, based on a water-in-oil emulsion of higher alcohols, esters and aliphatic fatty acids, is recommended to be used in EPDM and EPM, in NBR and butyl rubber compounds.

Fainplast Compounds Fainplast™ PVC MPH 50/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 50/T include engineering/industrial parts, hose/tubing and medical/healthcare.

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Elastocon® CLR45 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. It is available in Pellets form.

Rubaloy RA - 7380 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Oil Swelling and Processibility.

Oxy Vinyls 216S is suspension PVC resin designed for rigid applications.

Elastocon® 8058HL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058HL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058HL can be overmolded to polypropylene.Elastocon® 8058HL is supplied as ready to use pellets in 1000 lb. quantities.