Products in Leather & Textiles: Hot Melt Adhesive

VINNAPAS® B 60 FG is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by the polymerization of vinyl acetate. VINNAPAS® B 60 FG is tasteless. Applications include building and construction adhesives, composites and molding, do-it-yourself, industrial adhesives, industrial coatings, and resin modification.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70 micron, D100 = 150 micron.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~155 micron, D100 = 300 micron.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~140 micron, D100 = 250 micron.

Polybut™ 9 is a low molecular weight conventional polybutene.

Coating P. Materials CX-6041 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Coating P. Materials CX-6038 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Polybut™ 28 is a low molecular weight conventional polybutene.

Bondthane™ UD-301 is a soft and non-tacky with excellent adhesion to a variety of substrates for both coating and adhesive.

Polybut™ 80 is a low molecular weight conventional polybutene.

Polybut™ 6 is a low molecular weight conventional polybutene.

Kolon Industries SUKOREZ® SU-625 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-625 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Coating P. Materials CX-6040 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Bondthane™ UD-108 is a very soft solvent free polyurethane dispersion with excellent hydrolytic stability. It is used for adhesive and textile applications. It shows good adhesion to many substrates.

Bondthane™ UD-104 is a medium soft solvent free polyurethane dispersion with an excellent blend of properties. It is heat sealable in adhesive applications and shows good adhesion to many substrates.

Calprene 710 is a 70/30 linear structure butadiene/styrene thermoplastic copolymer, polymerized in solution.This product is presented in porous pellet form that allows rapid oil absorption.It is stabilized with a non-staining antioxidant system (free of TNPP), that is FDA approved for use in food contact applications. It is essentially gel free and very transparent.

Marcus Oil and Chemical M300 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Kolon Industries HIKOREZ® A-1115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Aquazol® 50 is a high-performance water-soluble polymer - manufactured and distributed worldwide exclusively by Polymer Chemistry Innovations (PCI). It is an excellent alternative to PVP (polyvinyl pyrrolidone) or PVOH (polyvinyl alcohol) in almost all applications, with the added advantage of thermal stability..

Polybut™ 10 is a low molecular weight conventional polybutene.

Kolon Industries HIKOREZ® T-3100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). HIKOREZ® T-3100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Kolon Industries SUKOREZ® SU-230 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers and metallocene polyolefins.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Kolon Industries SUKOREZ® SU-500 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-500 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.