Products in Leather & Textiles: Abrasion Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Cerex® fabrics are spunbond nonwoven nylon fabrics produced by spinning and autogenously bonding continuous filaments of nylon 6,6 into a thin, Smooth and strong fabric.

IRASORB CTO M10 is a highly efficient Infrared Absorbing Material, which has been especially designed to be used in solvent based coatings, inks and for extrusion processes in the polymer industry.IRASORB CTO M10 performs well as a Laser Marking Additive to generate white marks on dark polymers.

GLAMIDE® T-656E is a Polyamide 66 (Nylon 66) product. It is available in North America.Characteristics include: Flame Rated Wear Resistant

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

NEOSTATIC® Antistatic HB 155 is Suitable for the antistatic treatment of plastics, Special feasibility for inclusion into EPS, Reduces electrostatic charging on plastic surfaces by reducing the surface resistance to 108 – 109 Ohm. It has Excellent coverage – only 4-6 mg of agent required per m² .it is also effective at extremely low air humidity (20% r.h.). It has Long-term effect of at least 1 year – on dry plastic surfaces protected against abrasion. Physiologically harmless and therefore approved for foodstuffs packaging . It is Environmentally friendly, biologically degradable into natural substances.

Rubaloy RA - 7380 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Oil Swelling and Processibility.

Tovo Gomma CR 3300 60 is a rubber compound which has a trade name flame resistant chloroprene sheet 6.

Ve Chemical N660 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Tovo Gomma IIR 8060 60 is a rubber composite with the trade name butyl sheet 60 ShA3.

Paracril OZOM50 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

OpaLene LL E2507 is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

Dioshy TPU E990M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Grupa Azoty S.A Tarnamid® T-27 MCS V2 is a Polyamide 6 (Nylon 6) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MCS V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Paracril OZOM65 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Dioshy TPU T995NC is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

PermaFelx® 75 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

AH290 is a Ground ATH is used in Yarn, Mills, SMC.

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

Domamid® 6B40 is polyamide 6, 40% glass beads, is used for injection molding.

Domamid® 6G50 is polyamide 6, 50% glass fiber reinforced, is used for injection molding.

Dioshy TPU T960DM is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.

Tovo Gomma NR/BR 1002 is a rubber composite with the trade name Super abrasion resistant sheet and have Anti-abrasive propety.

Dioshy TPU T998M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Rubaloy RA - 75 is a polymer blend of specially selected polymers viz. High Nitrile and pretreated Poly Vinyl Chloride resin. This highly fuel resistant (Fuel 'C' and Fuel 'D') blend is an excellent replacement for conventionally used speciality Synthetic Rubbers for high oil, fuel, sour gas, heat, ozone, weather aging and lead free petrol resistance. It has a low die swell property for Extrusions and Calendaring.

VTEC™ PI is a High temperature resistance and it is Superior mechanical properties

Grupa Azoty S.A Tarnamid® T-27 GF30 V2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 GF30 V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

Dioshy TPU E998M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.