Products in Textile Manufacturing: Impact Resistance

SPINOPC® T43 001 GR08 2060 is a PC Unfilled Gray (RAL 7035) Flame Retardant for injection applications.

Domamid® 66G40 is polyamide 66, 40% glass fiber reinforced, is used for injection molding.

Domamid® 6G25 is polyamide 6, 25% glass fiber reinforced, is used for injection molding.

Dissipative product based on High density polyethylene (HD-PE). Unfilled.

MAGNAPBT® L30 200 NC00 is a PBT unfilled natural.

Domamid® 6M30 is polyamide 6, 30% mineral filler, is used for injection molding.

Domamid® 6G45 is polyamide 6, 45% glass fiber, is used for injection molding.

Domamid® 66M30 is polyamide 66, 30% mineral filler, is used for injection molding.

NGC040I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell,Italy. It is a UV stabilized grade with excellent stress crack resistance, which can be used in different injection molding applications i.e. Crates, Luggage, Furniture, Auto-components, and Bobbins etc

linear PPS, 40% glass fiber reinforced, impact resistant

ZELLAMID® 202 is a tough polyamide 6 material with high resistance to abrasion and impact.

Domamid® 66M40 is polyamide 66, 40% mineral filler, is used for injection molding.

Dissipative product based on Ethyl-Vynil-Acetate (EVA). Unfilled.

RUGOPPA® P17-105 is a PPA/PA %35 glass fiber white (Heat aging) for injection applications.

Domamid® 66G50 is polyamide 66, 50% glass fiber reinforced, is used for injection molding.

Domamid® 6G50 is polyamide 6, 50% glass fiber reinforced, is used for injection molding.

Domamid® 6B40 is polyamide 6, 40% glass beads, is used for injection molding.

SPINOPC® P18-090 is a PC UNFILLED NATURAL FLAME RETARDANT

RUGOPPA® P60 003 NC00 is a PPA %40 glass fiber natural (Heat Stb.) for injection application.

Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

Domamid® 66M25 is polyamide 66, 25% mineral filler, is used for injection molding.

RUGOPA® M40 100 NT00 is a PA6 unfilled natural for injection applications.

Domamid® 66G35 is polyamide 66, 35% glass fiber reinforced, is used for injection molding.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.

Acti-Tech™ Compatibilizer 11MA13 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process.Acti-Tech compatibilizer 11MA13 is a medium flexibility, low MFR grade among the Acti-Tech compatibilizers range. With its high viscosity, it is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as tie-layer material for film & sheet, adhesion promoter on metal, yarns or other polar substrates, soft compatibilizer for polar/unpolar polymers alloys, impact modifier of stiff polar engineering plastics.Due to the chemical nature of its polymer backbone, Acti-Tech compatibilizer 11MA13 is compatible with most polyolefins, i.e. PE, PP, EVA, EBA or POE.

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

RUGOPA® M60 100 NC00 is a PA6 unfilled natural for injection applications.

TRIBIT® 1500G30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

linear PPS, 30% glass fiber reinforced, impact resistant

Domamid® 6G30 is polyamide 6, 30% glass fiber reinforced, is used for injection molding.

Mini Fibers META-ARAMID FIBERS are manufactured fiber in which the fiber-forming substance is a long-chain synthetic polyamide in which 85% of the amide linkages are attached directly to two aromatic rings.

Domamid® 66B30 is polyamide 66, has 30% glass beads, is used for injection molding.

MAGNAPBT® L60 024 NC00 1000 is a PBT %20 glass fiber natural (Heat aging) for injection applications.

RUGOPPA® P17-105-1 is a PPA/PET %35 glass fiber white (Heat Aging) for injection application.