Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Industrial
Power, Water & Utilities
Products in Power, Water & Utilities
3,136 Products found in Power, Water & Utilities
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
SABIC's Specialties Business
NORYL™ Resin NH7010HV
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1090.0 - 1090.0 kg/m³
SABIC's Specialties Business NORYL NH7010HV resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH7010HV resin is a higher flow version of NH7010 resin and offers a good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability. This material is a good candidate for outdoor housings / enclosures and photovoltaic / solar junction box applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL™ Resin N190
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1100.0 - 1100.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
SABIC's Specialties Business NORYL™ N190 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N190 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *This grade is also referred to as NORYL™ N1900 in several regions.
SABIC's Specialties Business
ULTEM™ Resin 1010AR
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Extrusion Blow Molding (EBM), 3D Printing, Compression Molding, Foam Extrusion, Extrusion, Injection Molding, Film Extrusion, Profile Extrusion, Injection Compression Molding
Additives Included:
Mold Release Agent, Flame Retardant
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.
Wacker Chemie AG
NEXIPAL®
Functions:
Laminate
End Uses:
Sensors, Actuators, Electrodes
NEXIPAL® is a versatile EAP (Electroactive Polymer) laminate designed for actuators and capacitive sensors. It is composed of one or multiple ultrathin silicone layers, known as ELASTOSIL® Film, which have a thickness ranging from 20 to 400 µm. These silicone layers are coated with specialized electrodes, laminated together, and then precisely cut into the desired shape. Multiple layers can be stacked on top of each other to achieve the desired performance.
SABIC's Specialties Business
ULTEM™ Resin 2300R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
3D Printing, Compression Molding, Large Format Additive Manufacturing (LFAM), Extrusion, Injection Molding, Profile Extrusion, Sheet Extrusion
Fillers Included:
Glass Fiber
Additives Included:
Mold Release Agent, Flame Retardant
Flexural Modulus:
9600.0 - 9600.0 MPa
SABIC's Specialties Business ULTEM™ Resin 2300R is a standard flow 30% glass fiber reinforced polyetherimide resin with an added internal mold release. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL GTX™ Resin GTX830
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1328.0 - 1328.0 kg/m³
SABIC's Specialties Business NORYL GTX830 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8200 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX830 resin is an excellent candidate for a wide variety of applications including automotive under the bonnet applications and water meter housings. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin PW1000
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
3D Printing
Additives Included:
Flame Retardant, Heat Stabilizer
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business ULTEM™ Resin PW1000 is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and potable water certifications, NSF61, REG4, KTW-BWGL, W270, ACS, WRAS. The materials also have food contact compliance (FDA, CN, EC). Features are excellent mechanical, and dimensional properties up to high temperatures and under wet conditions. The material may offer very good hydrolytic and chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings. The material is RoHS compliant. Certified colors are natural (transparent amber) and black. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL™ Resin NH7010
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1090.0 - 1090.0 kg/m³
Flexural Modulus:
2520.0 - 2520.0 MPa
SABIC's Specialties Business NORYL NH7010 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) and exhibits an excellent balance of non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, and low specific gravity for light weight parts. This injection moldable grade carries UL94 flame ratings of 5VA at 2mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH7010 resin is an excellent candidate for applications such as electrical enclosures and solar/PV junction boxes. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound 2X98703
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Mold Release Agent
Flexural Modulus:
10440.0 - 10440.0 MPa
LNP THERMOCOMP 2X98703 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.
SABIC's Specialties Business
ULTEM™ Dielectric Film UTF120
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Film
Features:
Temperature Resistance, Flame Retardant, Unreinforced, Dimensional Stability, Design Flexibility, High Electric Breakdown Strength, Ease of Handling, Flame Resistant, Excellent Dielectric Properties
Density:
1290.0 - 1290.0 kg/m³
SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.
SABIC's Specialties Business
SILTEM™ Resin STM1700
Polymer Name:
Polyetherimide-Siloxane (PEI-Si) Copolymer
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant
Flexural Modulus:
2150.0 - 2150.0 MPa
SABIC's Specialties Business SILTEM™ Resin STM1700 is a top-quality, flexible polyetherimide (PEI)-siloxane copolymer designed specifically for wire and cable applications. It offers a halogen-free flame retardant solution according to VDE 0472, as well as low smoke emission and toxicity. This amber-colored, transparent material can be self-colored and easily processed using conventional equipment. It may also be suitable for flexible profiles or injection-molded parts. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 1000
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
3D Printing
Additives Included:
Flame Retardant
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business ULTEM™ Resin 1000 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS-compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance needs to be checked case by case for colored variants. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Wacker Chemie AG
HELISOL® 5A
Product Type:
Heat Transfer Fluid
Features:
Long Shelf Life, Anti-Fouling, High Efficiency, Non Corrosive, Low Density, Improved Heat Transfer Efficiency, High Temperature Strength, Wide Temperature Operating Range, Very Good Heat Resistance, Low Viscosity, Heat Resistance, Odorless, Good Thermal Stability, High Durability, High Linearity, Good Blocking Resistance, High Reliability, Low Pour Point
Chemical Family:
Silicones
HELISOL® 5A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its unique chemical structure gives it exceptional properties that differentiate it from organic materials like mineral oils. HELISOL® 5A is a clear, odorless, and colorless liquid.
SABIC's Specialties Business
ULTEM™ Resin PW2300
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
9600.0 - 9600.0 MPa
SABIC's Specialties Business ULTEM™ Resin PW2300 is a standard flow 30% glass fiber reinforced polyetherimide resin. The material is suitable for potable water applications. It has global food approvals and PW certifications for KTW-BWGL, EN16421, ACS, WRAS, NSF-61 and NSF-REG4. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material also offers good hydrolytic resistance. The material is opaque and available in natural and black color. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin PW2200
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
6500.0 - 6500.0 MPa
SABIC's Specialties Business ULTEM™ Resin PW2200 is a 20% Glass fiber filled, standard flow Polyetherimide (Tg 217?C). Specific grade-colors are designed and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LEXAN™ Copolymer SLX2471T
Polymer Name:
Polycarbonate (PC)
Additives Included:
Flame Retardant, Heat Stabilizer, Mold Release Agent, UV Stabilizer
Processing Methods:
Injection Molding
Flexural Modulus:
2450.0 - 2450.0 MPa
SABIC's Specialties Business Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound 5C004
Polymer Name:
Polyvinylidene Fluoride (PVDF)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Flexural Modulus:
13930.0 - 13930.0 MPa
LNP™ THERMOCOMP™ Compound 5C004 is a Polyvinylidene fluoride (PVDF) resin-based compound infused with 20% carbon fiber, imparting excellent electrical conductivity. This grade offers remarkable stiffness and strength characteristics, making it well-suited for applications in electrical and electronics, energy management, electronic components, and industrial material handling. The compound is processed using injection molding techniques.
SABIC's Specialties Business
NORYL™ Resin N1900
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1100.0 - 1100.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
SABIC's Specialties Business NORYL™ N1900 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N1900 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *this grade is also referred to as NORYL™ N190 in several regions.
SABIC's Specialties Business
ULTEM™ Resin DT1810EVUCL
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant, Mold Release Agent, Heat Stabilizer
Flexural Modulus:
3100.0 - 3100.0 MPa
ULTEM™ Resin DT1810EVUCL has improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound 2F005
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5200.0 - 5200.0 MPa
LNP THERMOCOMP 2F005 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 25% glass fiber.
SABIC's Specialties Business
NORYL™ Resin NH5020
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1110.0 - 1110.0 kg/m³
Flexural Modulus:
2980.0 - 2980.0 MPa
SABIC's Specialties Business NORYL NH5020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and exhibits high heat resistance with thin-wall FR performance. NORYL NH5020 resin carries a UL94 flame rating of V0 at 0.75mm along with a UL746C Outdoor Suitability rating of F1. The material offers a good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability and is a good candidate for photovoltaic / solar connectors, UPS Inverters / chargers, and outdoor enclosure applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL™ Resin WM330G
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1300.0 - 1300.0 kg/m³
Flexural Modulus:
8440.0 - 8440.0 MPa
SABIC's Specialties Business NORYL WM330G resin is a 30% glass fiber reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is available. NORYL WM330G resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
CHT Group
CHT Group TA-205I
Functions:
Anti-Foaming Agent
Chemical Family:
Silicones
Features:
Excellent Dispersibility
CHT Group TA-205I is an easy-to-disperse 5% active emulsion of a silicone antifoam compound. This product is specifically designed for chemical processing, pool, and spa applications. Belonging to the TA series, this product provides consistent performance in many standard applications.
CHT Group
CHT Group TA-116
Functions:
Anti-Foaming Agent, Defoamer
Chemical Family:
Silicones
Labeling Claims:
Halal, Kosher
Certifications & Compliance:
Kosher, Halal
CHT Group TA-116 is a water dispersible 50% active silicone industrial defoamer with excellent foam knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Detergents Laundry applications Coatings Waste Water treatment Oil and gas processing Pulp and paper Grinding applications
CHT Group
CHT Group XAF-101
Chemical Family:
Silicones
Functions:
Defoamer
End Uses:
Oil & Gas Applications, Paper & Pulp
CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications
CHT Group
CHT Group TA-1720
Functions:
Anti-Foaming Agent, Defoamer
Chemical Family:
Silicones
Labeling Claims:
Formaldehyde-free, Alkylphenol-free, Organic
CHT Group TA-1720 is a 100% active silicone-organic antifoam compound with excellent foam knockdown and persistence. This product works effectively even at low concentrations and in both hot and cold systems. Applications Bacterial and yeast fermentations Waste water treatment Food starch and protein washes
CHT Group
CHT Group TC-3023
Chemical Family:
Silicones
Functions:
Defoamer
Application Technique:
Sprayers
Features:
Freeze/Thaw Stable, Minimizes Foaming
End Uses:
Oil & Gas Applications
CHT Group TC-3023 is a food-grade, water-dispersible, 30% active silicone defoamer, with neutral pH. This antifoam is specially formulated to control foam in agriculture spraying applications. It is compatible with most aqueous processing applications however, it is advisable to screen each application before use. Key Applications Agriculture applications, including crop spraying Amine scrubbing Oil and gas processing Specialty chemical formulations
CHT Group
CHT Group XAF-102
Chemical Family:
Silicones
Functions:
Recycling Additive, Defoamer
Labeling Claims:
Alkylphenol-free, Water-free, Formaldehyde-free
Compatible Polymers & Resins:
Silicones
Features:
High Performance, Ease of Handling, Dispersible, High Temperature Strength, Cost Effective, Wide pH Range
CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.
CHT Group
CHT Group JAF antifoam series
Functions:
Anti-Foaming Agent, Defoamer, Recycling Additive
Chemical Family:
Silicones
Labeling Claims:
Formaldehyde-free, Alkylphenol-free, Residues-free
CHT Group JAF antifoam series products are water-dispersible, active silicone defoamers of various concentrations. They are formulated to control foam in a wide variety of industrial applications that have extreme pH systems. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.
CHT Group
CHT Group TA antifoam series
Functions:
Anti-Foaming Agent, Defoamer
Chemical Family:
Silicones
Labeling Claims:
Alkylphenol-free, Formaldehyde-free
Features:
Easy Handling
End Uses:
Oil & Gas Applications
CHT Group TA antifoam series products are water-dispersible, active silicone defoamers that are formulated to control foam in various industrial processes. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.
Wacker Chemie AG
SILFOAM® SE 47
Functions:
Anti-Foaming Agent, Defoamer
Chemical Family:
Silicones
SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.
Harcros Chemicals Inc.
Harcros Chemicals Antifoam WT
Chemical Family:
Non-Ionics
Functions:
Defoamer
Labeling Claims:
Oil-free, Heavy Metal-free, PFOA-free, No Added PFAS, Silicone-free, Not Tested on Animals, Oleic Acid-free, Irradiation-free, Melamine-free, GMO-free, Pesticide-free, Conflict minerals-free, PFOS-free, Food Allergen-free, GenX-free, Food Contact Acceptable
Features:
Low Viscosity
End Uses:
Waterborne Coating
Harcros Chemicals Antifoam WT is a versatile antifoam with multiple uses. It is a silicone and oil-free antifoam that can be used in reverse osmosis, ultrafiltration, and membrane water treatment systems. Other uses include paper processing, textile dyeing, plastic recycling, and water-based coatings. It has a low viscosity, dilutes easily in water, and has good knockdown and durability. This product has indirect food contact approvals.
Harcros Chemicals Inc.
WWT 3041
Functions:
Flocculant
Chemical Family:
Cationics, Polyacrylamides
Applicable Processes:
Water Clarification, Water Treatment, Dewatering, Solid-Liquid Separation, Industrial Water Treatment
Features:
Improved Dewatering
WWT 3041 is a structured, very high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering through rotary presses, screw presses and centrifuges.
Harcros Chemicals Inc.
WWT 8400 Y
Functions:
Flocculant
Chemical Family:
Cationics, Polyacrylamides
Applicable Processes:
Industrial Water Treatment, Water Clarification, Water Treatment
Features:
Improved Dewatering
Synonyms:
Hydrotreated light distillate (petroleum)
WWT 8400 Y is a structured, medium-molecular-weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for very high-shear applications such as rotary presses, screw presses, and centrifuges.
Harcros Chemicals Inc.
PWT 4816
Functions:
Flocculant
Chemical Family:
Polyacrylamides
Applicable Processes:
Industrial Water Treatment, Water Treatment
Features:
High Molecular Weight
PWT 4816 is a high-charge, very high-molecular-weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.
Harcros Chemicals Inc.
H-PAC® 3011
Functions:
Coagulant
Applicable Processes:
Industrial Water Treatment, Phosphorus Removal, Suspended Solids Removal, Waste Treatment, Color Removal, Turbidity Removal
Features:
Reduced Turbidity, Reduced Suspended Solids
H-PAC® 3011 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.
Show
36
of 3,136 results
Go to page
1
2
3
4
5
6
7
8
9
10