LNP™ THERMOCOMP™ Compound 5C004

Identification & Functionality

Chemical Family

Vinyls, Vinylics & Vinyl Derivatives

Fillers Included

Carbon Fiber

Polymer Name

Polyvinylidene Fluoride (PVDF)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Materials Features

Cost Effective,

ESD Protection,

Electrically Conductive,

High Stiffness,

High Strength,

Light Weight

Applications & Uses

Markets

Electrical & Electronics,

Industrial

Applications

Electrical & Electronics — Devices & Assemblies

Industrial Automation

Electrical & Electronics — Parts & Components

Semiconductor Manufacturing

Industrial — Power, Water & Utilities

Renewable Energy

Plastics & Elastomers End Uses

Electrical/Electronic Applications,

Energy Management,

Semiconductor Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break) ¹¹	84	MPa	ASTM D638
Tensile Strain (Break) ¹¹	0.7	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	16440	MPa	ASTM D638
Flexural Stress ¹¹	137	MPa	ASTM D790
Flexural Modulus ¹¹	13930	MPa	ASTM D790

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.75	g/cm³	ASTM D792

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	153	°C	ASTM D648

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	285	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	53	J/m	ASTM D256

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120 - 150	°C	—
Drying Time ⁷	4	Hrs	—
Melt Temperature ⁷	215 - 230	°C	—
Front - Zone 3 Temperature ⁷	225 - 245	°C	—
Middle - Zone 2 Temperature ⁷	210 - 225	°C	—
Rear - Zone 1 Temperature ⁷	190 - 210	°C	—
Mold Temperature ⁷	65 - 90	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America