Products in Power & Utilities: Polyethylenes

5 Products found in Power & Utilities

TDSWith TDS

Excelene 4980 banner

Electric Cable CompoundsExcelene 4980

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
Features:Good Colorability, Crosslinkable, Good Mechanical Properties, High Performance, Radiation Resistant, Flame Retardant, High Temperature Insulation Properties, Cost Effective, Good Electrical Properties, Flexible, Low Deformation Tendency
End Uses:Shipboard Cable Jacketing, Building Wire Jacketing, Wires, Building Wire Insulation, Industrial Cable Insulation, Industrial Cable Jacketing, Cables, Low Voltage Insulation, Switches

Excelene 4980 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Excelene 1000 banner

Electric Cable CompoundsExcelene 1000

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
Features:Crosslinkable, High Performance, Cost Effective, Good Electrical Properties
End Uses:Medium Voltage Insulation, Wires, High Voltage Insulation, Underground Power Cable, Cable Jacketing, Industrial Cable Insulation, Industrial Cable Jacketing, Power Cable Jacketing, Cables
Strain at Break:420.0 - 420.0 %

Excelene 1000 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

AquaGraft® 1-6008R banner

Electric Cable CompoundsAquaGraft® 1-6008R

Applications:Power & Utilities, Electrical Protection, Power Transmission & Distribution
Product Families:Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
End Uses:Wires, Cables, Power Cable Jacketing

AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

PEXIDAN® HF SX407K banner

SACO AEI PolymersPEXIDAN® HF SX407K

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
End Uses:Industrial Cable Insulation, Cables, Wires, Nuclear Power Applications
Density:1370.0 - 1370.0 kg/m³

PEXIDAN® HF SX407K pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX407K has been designed to be used in different nuclear power plant radiation resistance cables sheathing with LOCA approval. Different types of cable designs made using SX407 have complied with the following flame tests: - BS 4066 Part 1/IEC 332 Part 1; CEGB GDCD Standard 21; VDE 0472 Pt.804 Method C; VDE 0472 Pt.814; NF C 32- 070 Test 2 (Category C1); BS 4066 Part 3; IEC 332 Part 3 (Categories A, B & C).

PEXIDAN® HF SX559 banner

SACO AEI PolymersPEXIDAN® HF SX559

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
End Uses:Cables, Wires, Nuclear Power Applications
Density:1490.0 - 1490.0 kg/m³
Tensile Strength:14.0 - 14.0 MPa

PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.