Products in Aerospace Coatings

Flowing agent for powder coatings Lu'An Jietonda New Material SA88 is a flow agent which can be used for any powder coating system such as EP.PES/EP hybrid ,PES/TGIC.PES/Primid and PU etc .

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

CLiQFLOW® 709 is an amide modified hydrogenated castor oil based thixotropic additive for nonto mid-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and workability are also improved markedly with the organic thixotrope.

Technicure® D-44 is a pulverized grade of dicyandiamide with an average particle size of about 20 micron. The products contains fumed silica to prevent clumping and improve flow. Typically the product is used with epoxy resin between 3-8 phr. Due to larger particle size, the products offers lower exothermic heat than the finer grade of Dicy. Technicure® D-44 reacts with epoxy resin at temperatures higher than 170°C unless an accelerator is used. Suggested accelerators include Technicure® LC-80, Technicure® LC-100 and substituted ureas such as Technicure® MDU-11M, Technicure® PDU-250M and Technicure® TDU-200M. The type and loading level of an accelerator will provide excellent balance of low temperature reactivity and formulation shelf stability.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

SILLIKOLLOID P 87 puriss is a finest particle size distribution with good color neutrality.

ASCONIUM® 130 are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

ASCONIUM® 111 are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

AGITAN 105 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Mason Color Works Manganese Antimony Titanium Buff Rutile - 7140 Brown 40 is an inorganic pigment, is a reaction product of high temperature calcination in which Titanium (IV) oxide, Manganese (II) Oxide, ansd Antimony (V) Oxide in varying amounts are homogeneously and ioncally interdiffused to form a crystalline matrix of rutile.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Amperit® 526.088 product is Agglomerated, Sintered.

Hai Le Rui Chemical Cobalt blue P2028 are resistant to high temperatures, good weather resistance, not easy to fade, and cobalt blue has a certain degree of refractive light, can be used in outdoor traffic marking color.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Technicure® IPDU-8, N-3-(dimethylamino) carbonylaminomethyl-3,5,5-trimethylcyclohexyl-N,N-dimethyl-urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability. Among all substituted ureas as DICY cure accelerators, IPDU-8 offers the most latency.

Lu'An Jietonda New Material SA501 is a Film hardening agent for powder coatings.Jietonda® SA501 is a modified PTFE wax used for powder coatings to increase hardness and smoothness of film.

SILLITIN Z 89 puriss is similar to Sillitin Z 86 puriss but has a higher color requirements.

T Laser Red 3 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.